^{3M Scotchkote Electrical Coating FD 快乾 / 3M 電氣絕緣防水漆  60151 ECFD 替代 14853}

3M Scotchkote Electrical Coating FD is designed as a fast-drying sealantand bonding agent intended for use on joints wrapped with plastic electrical tape.

Product Features

 Compatible with Scotch® Vinyl Electrical Tapes
 Fast drying
 Flexible when dry
 Self-contained applicator
 Virtually no waste if container resealed after use

Scotchkote electrical coating FD is intended for use as an outer seal on plastic tape applications which are subjected to excessive amounts of oil. It also improves the weather resistance and moisture resistance of the taped joint or splice. It is suitable for direct burial, direct water immersion or above ground applications.

Physical Properties                         Typical Value
Tack Free Time @ 72°F/22°C          12 minutes
Adhesion to:
Wood      Good
Metal      Good
Rubber      Good
Plastic      Good

Electrical Properties Typical Value
Dielectric Strength:
Dry                             450 volts/mil
24 hrs. in H20              200 volts/mil

Chemical Properties Typical Value
Solvent                         Acctone
Solids (25%)                  Synthetic rubber & resin
Flash Point                     -4°F/-20°C (closed cup)

15 fl. oz. (0.44 L) of coating. Case quantity is 10 cans.  Item Number: 60151

特性: 1.耐候性良好﹐並耐濕氣。2.防止水分滲透﹐保護電機不生銹。3. 具彈性 4.快乾,  在 22 度C 12分鐘後　不黏手.  5. 工作溫度最高為 : 90度C( 190 度F)  閃點: 0°F/-18°C

用途: 1.電動機等之修護時, 作為漆面或絕緣防水之用。2.可增強絕緣能力。3. 室外電路接頭之防水﹑絕緣﹑保護

絕緣效用：乾後 450Volts/mil    或是  24hrs後在水中 200 volts/mil

可用於直埋或浸於水中之電器、電纜接頭之防水保護處理，免受天候環境的侵蝕，提高並延長使用年限，在強化防水性能外，另優化漆膜提升「快乾、抗油脂、耐候、耐濕、彈性」等功能。優異的彈性度及不透水性，能有效阻隔水份滲透，達到全面防水效果。

§ 防水、油脂、碳化氫及絕緣作用            

§ 塗於電氣用膠帶之外層，可防水、防油、耐天候變化，加強保護效果

§ 乾燥後漆面具有彈性，不易受機械傷害                   

§ 快乾、持久保持其乾燥性                        

 § 可用於直埋或浸於水中之電 器、電纜接頭之防水保護處理

§ 耐候性、耐濕性強                                        

§ 內含塗刷，使用方便                                

§ 電動機等之修護時，作為漆面或絕緣防水之用

§ 使用後可封罐，不易造成浪費                  

§ 室外電路接頭之防水、絕緣、保護

特性: 1.耐候性良好﹐並耐濕氣。2.防止水分滲透﹐保護電機不生銹。3. 具彈性 4.快乾,  在 22 度C 12分鐘後　不黏手.  5. 工作溫度最高為 : 90度C( 190 度F)  閃點: 0°F/-18°C

用途: 1.電動機等之修護時, 作為漆面或絕緣防水之用。2.可增強絕緣能力。3. 室外電路接頭之防水﹑絕緣﹑保護

絕緣效用：乾後 450Volts/mil    或是  24hrs後在水中 200 volts/mil

容量	15  . Oz / 0.44 litre
工作溫度	最高90°C
閃點	-18°C
	乾後450伏特/密耳或
絕緣效用	24小時後在水中
	200 電壓/密耳
顏色	暗褐
產地	美國

^{3M Scotchkote Electrical Coating / 3M 電氣絕緣防水漆    14853 停產}

Scotchkote electrical coating is intended for use as an outer seal on plastic tape applications which are subjected to excessive amounts of oil. It also improves the weather resistance and moisture resistance of the taped joint or splice. It is suitable for direct burial, direct water immersion or above ground applications.

A fast drying sealant and bonding compound, the coating is provided in a brush top 16 oz. can for quick and easy application, can containing 15 fl. oz. (0.44 L) of coating. Case quantity is 10 cans.  Item Number: 14853

* Fast drying / Flexible when dry / self-contained applicator / No waste if container resealed after use. Adhesive to wood, metal, rubber and plastic.

* Compatible with PVC tape. use as an outer seal

* Dielectric Strength : Dry   450 Volts/mil  or   24hrs in H2O 200 volts/mil

* Scotchkote can be applied down to approximately 0° F since the flash point of the solvents is 0° F, but the solvents will evaporate more slowly as the temperature decreases. It's operating high temperature is in the 176°F to 194° F ( 90°C) range.

特性: 1.耐候性良好﹐並耐濕氣。2.防止水分滲透﹐保護電機不生銹。3. 具彈性 4.快乾,  在 22 度C 15分鐘後　不黏手.  5. 工作溫度最高為 : 90度C( 190 度F)  閃點: 0°F/-18°C

用途: 1.電動機等之修護時, 作為漆面或絕緣防水之用。2.可增強絕緣能力。3. 室外電路接頭之防水﹑絕緣﹑保護

絕緣效用：乾後 450Volts/mil    或是  24hrs後在水中 200 volts/mil

相對於 3M 1601  14853 耐候性更好  1601是透明  14853是暗褐色   1601用噴的   14853是用塗的