^{3M TemflexE 1100 1100P 經濟版防腐膠帶}

TemflexE 1100 and 1100P (Printed) tapes are made of tough, polyvinyl chloride (PVC), expecially formulated
for corrosion protection of pipes, conduits and metallic cable jackets.

They are easy to apply and provide excellent protection against abrasion, puncture, corrosion and electrolytic action both above and below ground. These tapes resist corrosion caused by acids (e.g. sulfuric, hydrochloric, phosphoric), alkalis and other corrosive materials, including compounds of chlorine, bromine, sodium and lithium. They also resist salt water and sunlight.

Features: Resistance to galvanic and electrolytic action / Excellent abrasion resistance / Good impact and tear resistance / Resistance to weather–induced cracking and checking / High electrical strength / Excellent insulation resistance / UV resistant and temperature-rated to 176°F (80°C).

The plastic tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a specially formulated rubber–based, pressure–sensitive adhesive. The tape must be applicable at temperatures ranging from 10°F to 120°F (–12°C to 49°C) without loss of physical or electrical properties. The tape has the capabilities to be used in, both indoor and outdoor environments. The tape shall be compatible with all standard mill coated pipe and must not crack, split, slip or flag when exposed to various environments.

Applications: Corrosion protection above and below ground / Corrosion protection of conduit, pipe and systems subjected to abrasion, corrosion, electrolytic action / Corrosion protection of fittings and joints on mill coated pipe / Moisture sealing of threaded conduit joint.

Dielectric Strength:  10,000 Volts
Insulation Resistance: >10000000 Megohms
Thickness:  10 mils
Elongation:  200%
Breaking Strength: 25 lbs/in

TemflexE 1100 1100P 經濟版防腐膠帶
防腐蝕, 酸, 鹼、耐磨、抗衝擊  額定溫度:80℃