^{3M Copper Foil Shielding Tape 1182 Both Sides Acrylic Adhesive 16074}

^{3M金屬銅箔膠帶 1182 雙面丙烯酸膠黏劑 16074}

3M 1182 Tape consists of a 1-ounce deadsoft copper foil backing that is coated on both sides with a unique electrically conductive pressure sensitive acrylic adhesive.
• Deadsoft 1-ounce copper foil backing
• Conductive acrylic adhesive on both sides
• Supplied with removable liner on both sides for easy handling and diecutting

3M EMI Shielding Tape 1182 is UL 510 flame-retardant and ideally suited for EMI shielding, static charge draining, grounding; solderable; easily die cut.

3M 1182 is typically used to bond two surfaces together, both electrically and physically. An example would be adhering a conductive gasket to a conductive surface as part of the EMI shielding solution for an electronic enclosure.

Since 3M 1182 double-sided copper tape would typically be used as an electrical path between two surfaces, its most important feature is its conductivity. Highly conductive particles in the acrylic adhesive provide a multitude of electrical paths between the application substrate and the surface of the copper foil on each side. The resistance of the conductive path through the adhesive (measured over a 1inch-sq area) typically measures only a few milliohms.

Backing thickness: 1.4 mil (0,04mm)
Total thickness (backing plus adhesive on both sides): 3.5 mil (.088mm)
Breaking strength: 25 lb./in (44 N/10mm)
Adhesion to steel: 35 oz/in (3,8 N/10mm)
Electrical resistance through adhesive:  0.010 ohm
Flame retardancy:  Pass

厚 1.4-mil 金屬箔，雙面導電膠黏劑，用作電磁射線干擾屏蔽、 靜電洩放、接地、依模切割容易

If you are looking for Tape 16074 size W12.7mm, this is the tape. For Scanning Electron Microscopy 掃瞄式電子顯微鏡: