Product>>Tape>>3M EMI Shielding Tape 金屬屏蔽膠帶>>3M 壓紋銅箔膠帶 1245 非導電膠黏劑 Embossed Copper Foil with conductive Adhesive
|
3M EMI Embossed Copper Foil Shielding Tape 1245 Acrylic Adhesive 3M 金屬壓紋銅箔膠帶1245非導電丙烯酸膠黏劑 3M EMI Shielding Tape 1245 is UL 510 flame-retardant and ideally suited for EMI shielding; static charge draining, grounding; solderable; easily die cut. This 1.4 tape is an embossed copper foil with an acrylic pressure-sensitive adhesive. This tape is conductive through the adhesive.
3M 1245 Tape consists of an embossed 1-ounce
deadsoft copper foil backing and an aggressive pressure-sensitive acrylic
adhesive. The edges of the embossed pattern pressed into the foil cut
through the adhesive layer to establish reliable metal-to-metal contact
between the backing and the application substrate. 3M 1245 Tape is typically used for applications requiring excellent electrical conductivity from the application substrate through the adhesive to the foil backing. Common uses include grounding and EMI shielding in equipment, components, shielded rooms, etc. The copper foil backing is solderable and resists oxidation and discoloration. For 3M 1245 Tape, typical shielding effectiveness (far field) is in the range of 75dB to 85dB (30 MHz to 1 GHz).
Backing thickness: 1.4 mil (0,04mm) 厚 1.4-mil 金屬箔,非導電丙烯酸膠黏劑, 黏結後仍能導電,用於電磁射線干擾 、靜電洩放、接地,可焊接﹔依模切割容易 溫度耐100~120°C 3M 的銅箔 就算沒有鍍東西 也不會像一般銅箔 一樣容易氧化或是變色 表面有特殊處理 |
中央商業有限公司 Power Hub Inc.