^{3M Scotch Super 88 Vinyl Electrical Tape PVC 絕緣膠帶}

Scotch Vinyl Electrical Tape Super 88 is a premium grade, 8.5-mil thick, all-weather vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather application down to -18°C (0°F).

‧ Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105°C (220°F).

‧ Primary electrical insulation for 600-volt bus applications, and protective jacketing for high- and low-voltage bus.

‧ Protective jacketing for high-voltage cable splices and repairs.

‧ Harnessing of wires and cables.

 ‧Size  0.216mm thick -- 19mm x 20m   25mm x 33m   38mm x 33m

Scotch Tape Super 88 is an Underwriters’ Laboratories Listed and Canadian Standards Association Certified “Insulating Tape.”

全天候，加強型，耐磨、繞包速度快，通過 無鉛 RoHS, UL, CSA認證 /  額定溫度:105℃ /主要應用:600V及以下接頭主絕緣，護套保護

規格:19mm×20.1m×0.22mm 19mm×13.4m×0.22mm  38mm×13.4m×0.22mm

厚8.5mil（0.22mm）
適用溫度範圍從－18℃至105℃
具火焰自熄性及耐冷，熱之環境  使用時，可快速增加絶緣厚度與耐磨強度
品質符合ASTM D-3005 Type II, UL 510,MIL-I-24391B和CSAC22.2等之標準

電壓: 600V   耐壓值: 10000V     延伸性: 250%

顏色 黑
延伸性 250%
操作溫度 -18°C ~ 105°C
22°C 時對鋼板的黏性  25 oz./in.

產品編號		尺寸／卷	卷 ／ 盒	卷 ／ 箱
Super 88	3/4" x 66' (19 mm x 20.1mm)		10	100
	厚度	8.5mils(0.2mm)
Super 88	2" x 36yd. (51 mm x 32.9mm)		1	12
	厚度	8.5mils(0.2mm)

Commonly used in these types of applications: 

UL510: As primary insulation on applications up to 600V at max temperature of 80°C (176°F) and min temperature of -10°C (14°F) on joints and splices in wires and cables in accordance with NFPA 70, National Electrical Code 

CSA C22.2 No.197: As primary insulation on applications up to 1000V at max temperature of 105°C (221°F) and a min temperature of -18°C (0°F) on joints and splices in wires and cables in accordance with Canadian Electrical Code, Part 1 

IEC 60454-3-1: Classification Type 7, Designation IEC 60454-3-1-7/F-PVCP/90 for thermal index of 90°C (194°F) and min temperature rating of -18°C (0°F) 

Industrial, commercial and residential environments 

Where Flame Retardant and Sunlight, Cold Resistance rating is required – UL510 

Cable jacket repair (up to 600V (UL) / 1000V (CSA) as primary insulation) and as mechanical protection when overwrapping rubber splicing, and mastic tapes used on LV/MV/HV joints and splices 

Critical indoor and outdoor operations as determined by end-user where use of a general use vinyl electrical tape is not recommended 

Where compatibility with solid dielectric cable insulations, rubber and synthetic splicing compounds is required 

Where reducing moisture ingress is needed, best results achieved when used as an overwrap in combination with a rubber splicing or mastic tape product

For harnessing and bundling of wires and cable where faster build-up is needed