Product Index

Product >> Tape >> 3M Composite Film Tape 合金薄膜膠帶>> 3M Composite Film Tape MR94 MR94B 聚酯薄膜

 

 

3M Composite Film Tape MR94 MR94B Polyester Film/Non-Woven Laminate Tape with Rubber, Thermosetting, Pressure-Sensitive Adhesive

3M 復合薄膜膠帶 MR94 MR94B 聚酯薄膜 /薄墊    停產 No Longer Available

· Excellent electrical properties / · Conformable / · Puncture resistant / · UL Recognized Class 130°C / · Available in tan (MR 94) 棕色 and black (MR 94B)黑色

3M Composite Film Electrical Tape MR94 is best used for insulating, anchoring, banding and protecting start lead wires, terminal strips, end turns and connections on motors and transformers. This product is especially suited for applications such as stick-wound coils/transformers and bobbin-wound coils; for banding, anchoring and insulating; and for protecting
start wires, leads, terminal strips, insulation paper, end turns and connections in motors and transformers. To achieve maximum solvent resistance and holding performance, we suggest thermosetting the tape at one of the following cycles:
1 hour @ 150°C (300° F) / 2 hours @ 135°C (275° F) / 3 hours @ 120°C (250° F)

Color:  Tan or Black
Thickness: 4.0 mils (0.101mm)

Breaking Strength at Break:  30 lb./in (53 N/10 mm)
Elongation at Break: 50%
Adhesion to Steel: 40 oz/in (4.4 N/10 mm)
Dielectric Breakdown: 5000V
Temperature Class: 130°C
Insulation Resistance: >1x106 megohms
Electrolytic Corrosion Factor: 1.0 ratio

電氣性能極佳、從形性高,用於絕緣、固定、捆紮及保護起始引線、末端帶、 末端折回及馬達和變壓器的連接。

中央商業有限公司 Power Hub Inc., All Rights Reserved.