Product Index

Product>>Tape>>3M Epoxy Film Electrical Tape 環氧薄膜膠帶>>3M Epoxy Film Electrical Tape 1 Super 10 Super 20

 

3M Epoxy Film Electrical Tape 1 Acrylic Adhesive

3M 環氧薄膜膠帶 1  丙烯酸膠黏劑

3M Epoxy Film Electrical Tape 1  - www.phi.com.tw : has a flame-retardant 2.2 mil epoxy film backing with excellent handling properties and high dielectric strength. This tape has an acrylic adhesive that is resistant to heat, oxidation, solvents and oils.

Tape 1 is 3.5 mil in total thickness, use as an outer wrap for wrap and fill capacitors. Acrylic adhesive has resistance to heat, oxidation, solvents and oils. Use it as a coil cover, anchor, harnessing, banding and as core, layer, and crossover insulation. UL 510 flame-retardant, temperature rated to 266F (130C). This white tape is printable.  1 in x 72 yd (25,40 mm x 66 m), 36 per case.

Color:  white
Adhesive: acrylic
Backing Thickness: 2.2 mils (0,055 mm)
Total Thickness: 3.5 mils (0,088 mm)
Elongation (% at break): 120%
Operating Temperature: 130 C
Adhesion to Steel: 40 oz/in (4,4 N/10 mm)
Flammability: (UL 510) Yes
Printable Yes

Dielectric Breakdown:  6500 V
Breaking Strength: 30 lbs/in (53 N/10 mm)`
Insulation Resistance (megohms): >1000000
Electrolytic corrosion Factor: 1.0

3M Epoxy Film Electrical Tape 1 環氧薄膜膠帶, 厚2.2 mil阻燃基材  總厚3.5mil (0.088mm), 防燃帶基 基材厚度2.2mil(0.055mm) 處理極容易,高介電強度、抗鬆脫、抗溶劑、適用作外層封包電容器, 線圈, 變壓器, 繼電器 及固定電線.可在表面印刷。操作溫度 266F (130C). 丙烯酸Acrylic膠黏劑. 丙烯酸膠黏劑具有優良的耐溫, 抗氧化, 抗溶劑及抗油等功能.可在表面印字

 

 

 

3M Epoxy Film Electrical Tape Super 10 Rubber Thermosetting Adhesive

3M 環氧薄膜膠帶 10 熱固橡膠膠黏劑

3M Epoxy Film Electrical Tape Super 10 is 5 mil total thickness with rubber thermosetting adhesive that has resistance to heat, oxidation, solvents and oils. This tape is puncture resistant and has excellent electrical and handling properties.

3M Epoxy Film Electrical Tape Super 10 is tough, conformable, and resistant to solder damage. Its Thermosetting rubber adhesive has good initial adhesion and electrical purity. Use as coil cover, anchor, harnessing, banding and as core, layer, and crossover insulation. UL 510 flame-retardant, temperature rated to 311F (155C). Available in custom widths from 1/8 in to 24 in, and comes standard on a 72 yd roll on a 3 inch diameter core. 3M Epoxy Film Electrical Tape Super 10, White, Rubber Thermosetting Adhesive, 1 in x 60 yd (25,40 mm x 55 m), 36 per case. Color: Cream

Color: cream
Adhesive: thermosetting rubber
Backing Thickness: 3.5 mils (0,088 mm)
Total Thickness: 5.0 mils (0,127 mm)
Elongation (% at break): 120%
Operating Temperature: 155 C
Adhesion to Steel: 45 oz/in (4,9 N/10 mm)
Flammability (UL 510): Yes

Dielectric Breakdown: 8000 V
Tensile Strength: 45 lbs/in (79 N/10 mm)
Insulation Resistance (megohms): >1000000
Electrolytic Corrosion Factor 3M Test Method: 1.0
CIT Material Group: 1

To achieve maximum solvent resistance and holding performance, thermoset the tape at one of the following cycles:
1 hour @ 150 C  /  2 hours @ 135 C  /  3 hours @ 120 C

3M 環氧薄膜膠帶 10 熱固橡膠膠黏劑: 堅韌、從形性好、抗焊接、抗刺穿、電氣性能佳、處理容易﹔適用作線圈封包、固定 、綑紮、纏合、外層及線圈阻緣。 熱固橡膠膠黏劑, 有極佳的初始黏接力, 熱固過後, 其連接力增強,抗溶劑及耐熱性增加.操作溫度311F (155C). 乳白色 總厚 5mil.  長60M

建議做出以下的熱固處理:1 小時 @ 150 C  /  2 小時 @ 135 C  /  3 小時 @ 120 C

 

 

3M Epoxy Film Electrical Tape Super 20 Acrylic Adhesive - Pressure-Sensitive Adhesive

3M 環氧薄膜膠帶 Super 20 丙烯酸膠黏劑

3M Epoxy Film Electrical Tape Super 20 is 5 mil total thickness with an acrylic adhesive that has resistance to heat, oxidation, solvents and oils. This tape is puncture resistant and has excellent electrical and handling properties. The acrylic pressure-sensitive adhesive offers solvent resistance without a thermosetting bake cycle.

3M Epoxy Film Electrical Tape Super 20 is tough, conformable, and resistant to solder damage. Use this tape as a coil cover, anchor, harnessing, banding and as core, layer, and crossover insulation. UL 510 flame-retardant, temperature rated to 311F (155C). This tape is printable. Available in custom widths from 1/8 in to 24 in, and comes standard on a 72 yd roll on a 3 inch diameter core.

3M 環氧薄膜膠帶 Super 20 丙烯酸膠黏劑, 總厚5.0mil, 防燃帶基厚3.5mil,處理極容易,高介電強度、抗溶劑、抗翹邊抗鬆脫、耐溫、抗剪程度高, 適用作外層封包電容器, 線圈, 變壓器, 繼電器 及固定電線.可在表面印刷.

操作溫度311F (155C). 丙烯酸Acrylic膠黏劑. 丙烯酸膠黏劑具有優良的耐溫, 抗氧化, 抗溶劑及抗油等功能.長55M.

 

Part
No.
Description
Adhes.
Sys.
Total
Tape
Thick-
ness
Mils/mm
Break
Strgth
(lb/in)/
(N/
10mm)
Adhes.
to Steel
(lb/in)/
(N/
10mm)
% Elong
ation
Dielectric
Strength
Insul.
Class
(C)
UL/
UL510
Features/Benefits
1
Epoxy Film
A
3.5/0.088
30/53
40/4.4
120
6,500
130
Y
2.2 mil flame-retardant backing; excellent handling properties, high dielectric strength, solvent and flagging resistant; for use as an outer wrap on wrap and fill capacitors, coil cover, interlayer insulation and wire harness; PRINTABLE.
Super 10
Epoxy Film
RT
5.0/0.127
45/79
45/4.9
120
8,000
155
Y
Tough, conformable, resistant to solder damage, puncture resistant, good electrical properties; for use as coil cover, anchor, harnessing, banding and as core, layer and crossover insulation.
Super 20
Epoxy Film
A
5.0/0.127
45/79
30/3.3
120
8,000
155
Y
Tough, conformable, resistant to puncture and solder damage, good electrical and handling properties; excellent flagging, solvent resistance; good high-temperature shear strength; for use as coil cover, anchor, harnessing, banding and as core, layer and crossover insulation; PRINTABLE.

(1) RT = Thermosetting Rubber, A = Acrylic, ST = Silicone (2)Y= UL510 Recognized


中央商業有限公司 Power Hub Inc.