^{3M 8919MSR 纖維強化膠帶 Scotch Filament Tape 8919MSR Pressure-Sensitive Adhesive}

玻璃纖維絲膠帶8919 MSR 是使用於各式金屬加工應用的工業強度膠帶，專門設計來接觸油性表面。

8919MSR 膠帶由透明、纖維強化的聚丙烯背襯組成，提供出色的抗拉強度，即使刮傷或刺穿，此膠帶也具備耐磨、防潮、耐擦和抗斷裂性。

膠帶易於分配、不會捲曲且易於黏貼。 可在金屬表面上提供良好的黏合力和長期固著力。 可印刷。

應用：金屬線圈密封、金屬面板拼接、綁束、強化和搭接應用、綁束鋼筋和金屬水道。

產品介紹
可確保封箱機的L形夾達到完整包覆(FOL)與密封各式摺疊型包裝盒或非標準型包裝盒
橡膠樹脂合成的接著劑可輕易黏合大部份的纖維板、塑膠和金屬表面
玻璃纖維細絲紗線可強化包裝盒的密合、捆紮與保護
可用於固定櫥櫃、架子、門扇、板材、繩索與其他零件
工業級強度的玻璃纖維絲強化膠帶，具有抗穿刺、耐磨損和抗水氣特性。

Backing: Polyester film

Adhesive: Pressure sensitive modified synthetic rubber resin

Fiber Reinforcement: Glass Yarn

Color: Transparent

Adhesion to Steel: 99 oz./in. width ( 108N/100 mm width )
Tensile Strength: 380 lbs./in. width (6655 N/100 mm width)
Elongation at Break: 5%
Total Thickness: 7.0 mil (0.18 mm)

• Abrasion and moisture resistant.
• Good handling.
• High tensile strength.
• Allows printing and illustrations to be
seen through the tape.
• High shear and great initial adhesion.
• Excellent aging.
• Good protection of filaments and
adhesive to provide longer package life.
• Assures maximum package performance
for limited outdoor use.

3M 898 MSR 專門用途纖維膠帶: 金屬卷及其它卷狀產品固定   用作包裝固定用途, 厚7.0mil 0.18 mm

^{3M Electrical Tape 46 Polyester Film/Glass Filaments ----  No Longer in Production}

^{3M 聚酯薄膜纖維強化膠帶 46 熱固橡膠粘劑 ---- 沒生產了}

3M Filament Reinforced Electrical Tape 46 is a 7 mil glass filament-reinforced polyester film backing  with a thermosetting, pressure-sensitive rubber adhesive system. It offers good tensile strength and edge-tear resistance for use in end-turn taping.

High tensile strength / High dielectric strength / UL recognized Class B (130°C)

The polyester film/glass backing has excellent physical and electrical characteristics. 46 tape is especially suited for such applications as lead anchoring and banding of coils where high edge-tear resistance and low stretch under application tension are needed.

Caliper: 7.0 mils (.177 mm) 厚
Breaking Strength:  275 lbs./in (481 N/10 mm)
Elongation:  5%
Adhesion to Steel: 50 oz/in (5.4 N/10 mm)
Dielectric Strength: 5500V
Insulation Resistance: 3000 megohms
Electrolytic Corrosion Factor: 1.0 ratio

^{3M Electrical Tape 1146 Polyester Film/Glass Filaments, Reinforced Backing with Thermosetting Rubber, Pressure Sensitive Adhesive}

^{3M 聚酯薄膜纖維強化膠帶 1146 熱固橡膠粘劑}

3M 1146 Tape is a 6.5 mil polyester film/glass filament tape coated with a thermosetting, pressure-sensitive rubber adhesive.

• UL Recognized, Class B (130°C)
• High breaking strength
• Suitable for heavy duty use
• For maximum solvent resistance and holding properties, the tape should be thermoset at one of the following cycles:
1 hour @ 150°C (300°F)
2 hours @ 135°C (275°F)
3 hours @ 120°C (250°F)

3M 1146 tape is especially suited for heavy duty equipment applications, bundling armature coils,
anchoring, lead holding of heavy gauge wires in transformers, coils and electric motors.

Adhesive: Rubber Thermosetting
Backing: Polyester film/Glass filament
Backing Thickness: 5.5 mils (0.140mm)
Total Thickness: 6.5 mils (0.165 mm)
Color: Clear
Temperature Class: 130°C
Dielectric Breakdown: 5500V
Breaking Strength: 300 lbs/in (525N/10mm)
Elongation: (% at break) 5%
Adhesion to Steel:  55 oz/in (6.05N/10mm)
抗張強度大、抗撕裂﹔用於末端接回分接

^{3M Tape 1076 Polyester Film/Paper-Backed Filament Tape with Oil-Saturable Backing Acrylic Adhesive}

^{3M 聚酯薄膜膠帶 1076 丙烯酸膠黏劑}

3M Electrical Filament Tape 1076 is made of an electrical-grade paper backing, reinforced with scrim glass filaments and an oil-compatible acrylic pressure-sensitive adhesive. Unlike conventional film-backed tapes, this products’ paper backing construction provides for complete impregnation and saturation of the tape in adjacent layers of insulation. This key feature minimizes the possibility of
impregnation voids leading to corona discharges, with subsequent deterioration of insulating materials.
Polyester film used in making traditional designed filament tapes does not absorb transformer oil. The unique coating on the back side of the 1076 tape promotes exceptional bonding of the diamond paper
insulation epoxy during the transformer baking process.

Applications
The primary application for 1076 filament tape is holding down magnet wire, copper strips (sheets) and insulation materials during the demanding coil winding process. Once in place in the transformer coil, the
tape provides a second key performance attribute by saturating in the transformer oil. These attributes together make 1076 filament tape the right choice for oil-filled transformers. A transformer coil is manufactured one of two ways, first by winding magnet wire on a core with layers of secondary insulation
between the layers of magnet wire and secondly by using copper sheets on a core with layers of primary insulation between the layers of copper sheets. A core application for 1076 filament tape is holding down the magnet wire at the beginning and end of each layer. This is also referred to as the start and finish
between magnet wire turns. In addition, 1076 filament tape is used to hold down the insulation sheet layers between magnet wire layers.

Filament tape 1076 is particularly well suited for these applications because of the product’s high tensile strength. This allows the tape to withstand the stress applied to the tape when the windings are being applied at high winding machine speeds.

Filament tape 1076 provides five core performance benefits for critical oil-filled transformer applications.
1. Good initial adhesion of the tape to magnet wire, strip copper and insulation materials
2. Stable adhesion even after long exposure to transformer fluids
3. Stiffness for excellent handling, which promotes operator efficiency during application of the tape during coil winding operations
4. Saturable backing for air entrapment resistance which minimizes the trapped air between adhesive layers in the applied tape

5. Compatibility with diamond paper insulation thermal bonding with back side of tape
6. Easy consistent unwind to promote operator efficiency

抗溶劑、抗剪切能力極佳的膠黏劑 ﹔抗張強度大，使其可以在有絕緣油變壓器中作固定使用

膠帶 1076 主要與其他膠帶不同是

1. 網狀編織纖維補強 較一般直線纖維堅固
2. 特殊設計 減少膠帶包含住的空氣 避免 corona discharge
3. 特殊膠系適用於絕緣油中
4. 從型性好 可貼於不平的表面

^{Tape 1276 Polyester Film/Paper-Backed Filament Tape with Oil-Saturable Backing Acrylic Adhesive}

^{3M 聚酯薄膜膠帶 1276 丙烯酸膠黏劑  停產 No longer Available}

3M Filament Reinforced Electrical Tape 1276 is a 9 mil glass filament-reinforced paper backing with high-shear strength acrylic adhesive. Solvent-resistant, it offers good tensile strength for holding in oil-transformer applications.

3M Electrical Tape 1276 is made of an electrical-grade paper backing, reinforced with parallel glass filaments and an oil-compatible acrylic pressure-sensitive adhesive.
Unlike conventional film-backed tapes, this products' paper backing construction provides for complete impregnation and saturation of the tape in adjacent layers of insulation. This feature minimizes the possibility of voids leading to corona discharges, with subsequent deterioration of insulation materials. Polyester film used in making traditionally designed filament tapes does not absorb transformer oil. The unique coating on the back side of 1276 tape promotes exceptional bonding of the diamond paper insulation epoxy during the transformer baking process.

· Stable adhesive even after long exposure to transformer fluids
· Saturable backing for air entrapment resistance
· Minimal air trapped between adhesive layers in tape
· Minimum contamination of oil power factor and interfacial tension
· Stiffness for superior handling, which promotes operator efficiency
· Diamond paper insulation thermal bonding compatibility with back side of tape

Thickness: 9.0 mils (.228 mm)
Breaking strength at break: 275 lbs./in (481 N/10mm)
Elongation at break: 5%
Adhesion to steel: 40 oz/in (4.4 N/10,,)
Dielectric breakdown: 3500V
Electrolytic corrosion factor: 1.0

抗溶劑、抗剪切能力極佳的膠黏劑 ﹔抗張強度大，使其可以在有絕緣油變壓器中作固定使用

^{3M 1139 Electrical Tape Polyester Film/Glass Filament Reinforced Tape with
Acrylic Pressure-Sensitive Adhesive}

^{3M 聚酯薄膜纖維強化膠帶 1139 丙烯酸膠黏劑}

3M Filament-Reinforced Electrical Tape 1139 is a 6.5 mil polyester film/glass filament tape coated with an acrylic, pressure-sensitive adhesive.• UL Recognized, Class F (155°C)• Solvent resistant without thermosetting• High breaking strength• Suitable for heavy duty use

3M Filament-Reinforced Electrical Tape 1139 is especially suited for heavy duty air and oil filled transfer applications, reinforcements, holding and separating ground insulation, bundling motor coils and coil covering.

Adhesive: Acrylic
Backing:  Polyester film/Glass filament
Backing Thickness: 5.5 mils (0.140mm)
Total Thickness: 6.5 mils (0.165 mm)
Color: Clear
Temperature Class: 155°C
Dielectric Breakdown: 5500V
Breaking Strength: 225 lbs/in (394N/10mm)
Elongation: (% at break) 6%
Adhesion to Steel: 35 oz/in (3.85N/10mm)

抗溶劑、抗剪切能力極高的膠黏劑，抗張強度大、抗撕裂, 用作固定線圈用途, 厚5.5mil 薄膜，適用於155°C

^{3M 1339 Electrical Tape Polyester Film/Glass Filament Reinforced Tape with Acrylic, Pressure-Sensitive Adhesive}

^{3M 聚酯薄膜纖維強化膠帶 1339 丙烯酸膠黏劑}

3M Electrical Tape 1339 is a polyester film/glass filament tape coated with a pressure-sensitive acrylic adhesive system. The polyester film/glass backing has excellent physical and electrical characteristics. The back side of the tape has a special coating which allows for an even, controlled unwind. It also promotes permanent anchoring in application. Typical applications for 1339 include lead anchoring, banding of coils, lead tape anchoring and other uses where tensile strength is needed.

· Excellent conformability · High tensile strength · High dielectric strength · Class B (130°C) · UL recognition

Thickness: 6.5 mils (0,165 mm)
Breaking Strength: 275 lb./in (481 N/10 mm)
Elongation: 5%
Adhesion to Steel: 35 oz/in (3,81 N/10 mm)
Dielectric Strength: 5,500V
Temperature Class: 130°C
Insulation Resistance: 100000 megohms
Electrolytic Corrosion Factor: 1.0

抗溶劑、抗剪切能力極高的膠黏劑，抗張強度大、抗撕裂, 用作固定用途, 厚6.5mil 薄膜，適用於130°C

^{3M 898 纖維強化膠帶 Scotch Filament Tape 898 Pressure-Sensitive Adhesive}

Scotch Filament Tape 898 is a high-performance transparent packaging tape reinforced along its length with continuous glass-yarn filaments, which give the tape very high tensile strength. The transparent 3M Scotchpro backing provides excellent abrasion, moisture and scuff resistance. The adhesive is an aggressive packaging adhesive specifically formulated to provide balanced performance having both high adhesion and long term holding power.

Backing: Scotchpro Film

Adhesive: Pressure sensitive synthetic rubber resin

Reinforcement: Glass Yarn

Color: Clear

Adhesion to Steel: 70 oz./in. width (77 N/100 mm width)
Tensile Strength: 380 lbs./in. width (6650 N/100 mm width)
Elongation at Break: 5%
Total Thickness: 6.6 mil (0.17 mm)

• Abrasion and moisture resistant.
• Good handling.
• High tensile strength.
• Allows printing and illustrations to be
seen through the tape.
• High shear and great initial adhesion.
• Excellent aging.
• Good protection of filaments and
adhesive to provide longer package life.
• Assures maximum package performance
for limited outdoor use.

898 專門用途纖維膠帶: 金屬卷及其它卷狀產品固定   用作包裝固定用途, 厚6.6mil 0.17 mm

^{3M 898MSR 纖維強化膠帶 Scotch Filament Tape 898MSR Pressure-Sensitive Adhesive}

Scotch Filament Tape 898MSR is a high-performance transparent filament tape reinforced along its length with continuous fiberglass-yarn filaments, which gives the tape a very high tensile strength. The clear polyester backing provides excellent abrasion, moisture and scuff resistance. The adhesive is a modified synthetic rubber resin adhesive specifically formulated to provide very good oily metal adhesion
performance. The adhesive also provides a balanced performance having high adhesion and long term holding power for a variety of metal working applications.

此新版 898 898MSR 使用有改良過的膠系  黏性較舊版的  高出許多

Backing: Polyester film

Adhesive: Pressure sensitive modified synthetic rubber resin

Reinforcement: Glass Yarn

Color: Clear

Adhesion to Steel: 90 oz./in. width ( 99N/100 mm width )
Tensile Strength: 380 lbs./in. width (6650 N/100 mm width)
Elongation at Break: 3%
Total Thickness: 6.0 mil (0.15 mm)

• Abrasion and moisture resistant.
• Good handling.
• High tensile strength.
• Allows printing and illustrations to be
seen through the tape.
• High shear and great initial adhesion.
• Excellent aging.
• Good protection of filaments and
adhesive to provide longer package life.
• Assures maximum package performance
for limited outdoor use.

3M 898 MSR 專門用途纖維膠帶: 金屬卷及其它卷狀產品固定   用作包裝固定用途, 厚6.0mil 0.15 mm

^{3M 898 898A 纖維強化膠帶 Scotch Filament Tape 898 Pressure-Sensitive Adhesive}

Backing: Scotchpro Film

Adhesive: Pressure sensitive synthetic rubber resin

Reinforcement: Glass Yarn

Color: Clear

Adhesion to Steel: 75 oz./in. width (82 N/100 mm width)
Tensile Strength: 380 lbs./in. width (6650 N/100 mm width)
Elongation at Break: 5%
Total Thickness: 6.6 mil (0.17 mm)

• Abrasion and moisture resistant.
• Good handling.
• High tensile strength.
• Allows printing and illustrations to be
seen through the tape.
• High shear and great initial adhesion.
• Excellent aging.
• Good protection of filaments and
adhesive to provide longer package life.
• Assures maximum package performance
for limited outdoor use.

3M 898 A 專門用途纖維膠帶: 金屬卷及其它卷狀產品固定   用作包裝固定用途, 厚6.6mil 0.17 mm

^{3M 897 纖維膠帶 Scotch Filament Tape 897 Pressure-Sensitive Adhesive}

Adhesion to Steel: 60 oz./in. width (65 N/100 mm width) D-3330
Tensile Strength: 170 lbs./in. width (2980 N/100 mm width) D-3759
Elongation at Break: 3% D-3759
Total Thickness: 6 mil (0.15 mm) D-3652

897纖維較疏  898較密 較黏

897 專門用途纖維膠帶: 金屬卷及其它卷狀產品固定   用作包裝固定用途, 厚6mil 0.15 mm