Product Index

Product>>Tape>>3M PTFE Film Tapes 聚四氟乙烯薄膜>>3M PTFE Film Tapes 聚四氟乙烯薄膜膠帶 60 61 62 63 5490

聚四氟乙烯薄膜(鐵氟龍, Teflon, 特氟龍,PTFE): 耐高溫, 絕緣, 防腐蝕抗化學性, 耐老化, 抗微波,抗粘具天然離形效果  自 然潤滑. 耐高溫長期抗熱性  在極大溫差時,物理及電氣性能仍保持不變.

 

 

Tape 60 PTFE Film \with Silicone Adhesive 聚四氟乙烯薄膜

3M Tape 60 has consistent physical and electrical properties over a broad temperature range; for use on
high
temperature coils, capacitors and wire harnesses.  2.0-mil PTFE backing.  Silicone thermosetting adhesive. Translucent.

Adhesive: Silicone Thermosetting
Backing: PTFE Film
Backing Thickness: 2.0 Mil
Total Thickness: 4.0 mils/0.102mm
Temperature Class: 180C /356F
Dielectric Breakdown: 9500 Volts
Insulation Resistance (megohms): >100000
Breaking Strength: 20 lbs./in. (35 n/10mm)
Elongation (% at break): 200
Electrolytic Corrosion Factor: 1.0
Adhesion to Steel: 30 oz./in. (3.20 n/10mm)
UL Flame Retardant: Yes

Printable: No

厚 2mil 薄膜,在極大溫差時,物理及電氣性能仍保持不變, 適用於高溫線圈,電容器及扁平漆色線。膠黏劑: silicone 微透明  與其相似的#61膠帶,厚5-mil薄膜。 適用于高介電及高斷裂強度的場合  (13"*33M)

 

 

Tape 61 PTFE Film with Silicone Adhesive 聚四氟乙烯薄膜

3M Tape 61 has consistent physical and electrical properties over a broad temperature range; for use on
high
temperature coils, capacitors and wire harnesses where high dielectric and breaking strength are required. 5.0-mil PTFE backing. Silicone thermosetting adhesive. Translucent.

Adhesive: Silicone Thermosetting
Backing: PTFE Film
Backing Thickness: 5.0 Mil
Total Thickness: 7.0 mils/0.178mm
Temperature Class: 180C /356F
Dielectric Breakdown: 15000 Volts
Insulation Resistance (megohms): >100000
Breaking Strength: 45 lbs./in. (79 n/10mm)
Elongation (% at break): 300
Electrolytic Corrosion Factor: 1.0
Adhesion to Steel: 35 oz./in. (3,8 n/10mm)
UL Flame Retardant: Yes

Printable: No

厚 5mil 薄膜,適用於高介電及擊穿強度時使用,在極大溫差時,物理及電氣性能仍保持不變, 適用於高溫線圈 、電容器及扁平漆色線。膠黏劑: silicone 微透明

 

 

Tape 62 Bondable PTFE Film With Silicone Adhesive 聚四氟乙烯薄膜

3M PTFE Electrical Tape 62 is supplied on a liner; bondable backside for higher adhesion to its own backing and better bonding of resins and varnishes; for use on high temperature coils, capacitators and wire harnesses. Printable. 2.0-mil PTFE backing, supplied on a liner.  Silicone thermosetting adhesive, Supplied on 3 inch cores. Translucent.

Adhesive: Silicone Thermosetting
Backing: PTFE Film
Backing Thickness: 2.0 Mil
Total Thickness: 4.0 mils/0.102mm
Temperature Class: 180C /356F
Dielectric Breakdown: 9500 Volts
Insulation Resistance (megohms): >100000
Breaking Strength: 20 lbs./in. (35 n/10mm)
Elongation (% at break): 200
Electrolytic Corrosion Factor: 1.0
Adhesion to Steel: 30 oz./in. (3.20 n/10mm)
UL Flame Retardant: Yes

Printable: Yes

厚 2mil 薄膜,有襯紙,具有黏結力強的底部膠黏,能更有效地黏合其帶基,並提高對絕緣漆及樹脂的黏結, 用途與 #60 相似﹔可在表面印刷. 膠黏劑: silicone 微透明

 

 

Tape 63 PTFE Film With Acrylic Adhesive 聚四氟乙烯薄膜丙烯酸膠黏劑

3M Tape 63 is for use on coils, capacitors and wire harnesses; solvent-resistant adhesive; for use where
chemical properties are more important than temperature resistance. 2.0-mil PTFE backing,  Acrylic adhesive, Supplied on 3 inch cores. Translucent.

Adhesive: Acrylic
Backing: PTFE Film
Backing Thickness: 2.0 Mil
Total Thickness: 3.5 mils/0.088mm
Temperature Class: 155C /307F
Dielectric Breakdown: 9500 Volts
Insulation Resistance (megohms): >100000
Breaking Strength: 20 lbs./in. (35 n/10mm)
Elongation (% at break): 200
Electrolytic Corrosion Factor: 1.0
Adhesion to Steel: 35 oz./in. (3.8 n/10mm)
UL Flame Retardant: Yes

Printable: No

厚 2mil 薄膜,微透明,聚抗溶性的黏結劑,適用於化學性能較耐溫性能重要的情況下.膠黏劑: 丙烯酸. (14"*36YD/支)

 

Pipe Thread Sealant Tape  

3M PTFE Pipe Thread Sealant Tape 止洩帶

Tape 48 is a milky white unfused plastic film made of PTFE fluorocarbon resin. Forms a leak proof seal and helps prevent cross threading on pipe threads.

*  0.1mmx13mmx15m / 10 pcs a pack & 1000 pcs per case

聚四氟乙烯, Teflon, 特氟龍:耐高溫, 絕緣, 防腐蝕,耐老化,抗微波,自潤滑. 在極大溫差時,物理及電氣性能仍保持不變. 用於螺牙防漏,改善緊密度. 裝置水桶龍頭時,止洩帶可確保不漏. 必須採用相對於螺紋做逆向纏繞,也就是逆時針方向.

 

 

PTFE Extruded Film Tape 5490  With Silicone Adhesive 鐵氟龍膠帶 助滑

3M Tape 63 is for use on coils, capacitors and wire harnesses; solvent-resistant adhesive; for use where
chemical properties are more important than temperature resistance. 2.0-mil PTFE backing,  Acrylic adhesive, Supplied on 3 inch cores. Translucent.

Adhesive: Silicone
Backing: PTFE Film
Adhesion to Steel: 27 oz./in. width (29 N/100 mm) D-3330
Tensile Strength: 22 lbs./in. width (385 N/100 mm) D-3759
Elongation at Break: 150% D-3759
Backing Thickness: 2.0 mils (0.05 mm) D-3652
Total Tape Thickness: 3.7 mils (0.09 mm) D-3652
Temperature Use Range: -65 to 400F (-54 to 204C)

 

Extruded, calendered film tapes that resist curling during unwind and provide an exceptionally smooth surface when applied.
Extruded PTFE film tapes lie flatter than typical skived PTFE film tapes.
Thicker backing helps extend the service life, compared to thinner versions, when subjected to abrasion or wear.
Provides excellent chemical resistance except to organic solvents. Note: The silicone adhesive will be attacked by commercial organic solvents and is not recommended for applications requiring organic resistance.

 

Easy-release surface on rollers, plates, belts, etc. where build-up of sticky materials and inks can occur.
Low coefficient of friction surface on rollers, formers, etc. to facilitate web movement.
Chemical resistant surface for sealing and masking.
Wrapping rubber nip rollers on hot polyethylene extrusion machines.

 

厚 2mil 薄膜,微透明 . (14"*36YD/支)

1. 低摩擦係數 -- 具自然潤滑性質的鐵氟龍面材,可增加許多滾筒材料的操作性。
2. 優異的抗熱性質---耐高熱的鐵氟龍玻璃布膠帶,可提供許多需熱封機器長時間的抗熱性。
3. 抗黏及離形能力 --- 具天然離形效果的鐵氟龍面材,在熱塑件射出時保持滾筒的乾淨,不會形成一層塑膠膜。
4. 抗化學性 --- 鐵氟龍面材提供在嚴苛的設計環境下,具化學阻絕性。
5. 柔軟性 --- 鐵氟龍膠帶在黏貼滾筒時,非常容易使用及有效。
 

3M 鐵氟龍膠帶5490可用於進料階段,藉降低摩擦係數傳送滾輪以幫助印刷片移動更容易。

5491 -  Backing Thickness: 5.0 mils

5491 -  Backing Thickness: 5.0 mils

 

Part
No.
Description
Adhes.
Sys.
Total
Tape
Thick-
ness
Mils/mm
Break
Strgth
(lb/in)/
(N/
10mm)
Adhes.
to Steel
(lb/in)/
(N/
10mm)
% Elong
ation
Dielectric
Strength
Insul.
Class
(C)
UL/
UL510
Features/Benefits
60
Film
ST
4.0/0.102
20/35
30/3.2
200
9,500
180
Y
2 mil film; consistent physical and electrical properties over a broad temperature range; for use on high temperature coils, capacitors and wire harnesses.
61
Film
ST
7.0/0.178
45/79
35/3.8
300
15,000
180
Y
5 mil film; suitable for applications similar to 60 tape where high dielectric and breaking strength are required.
62
Bondable Film on liner
ST
4.0/0.102
20/35
30/3.2
200
9,500
180
Y
2 mil film; bondable backside for higher adhesion to its own backing and better bonding of resins and varnishes; suitable for applications similar to 60 tape; PRINTABLE Printable: Yes
63
Film
A
3.5/0.088
20/35
35/3.8
200
9,500
155
Y
2 mil film; similar to 60 tape; solvent-resistant adhesive; for use where chemical properties are more important than temperature resistance

(1) RT = Thermosetting Rubber, A = Acrylic, ST = Silicone (2)Y= UL510 Recognized

 

中央商業有限公司 Power Hub Inc.