Product Index

Product>>Lubricants, Coatings & Cleanings>> 3M 工業級殘膠清潔劑 Adhesive Remover 除殘膠


3M工業級殘膠清潔劑 Adhesive Remover

3M工業級殘膠清潔劑: 殘膠清潔 天然清潔 除膠 

1. 柑橘萃取的天然強力除膠噴劑 85% 丙烷 15% , 符合FDA21  CRE 180.20 安全標準
2. 適用於殘膠的去除及施工前的表面清潔
3. 能有效清除頑強的汙漬、殘膠、柏油、廚房油垢及silicone


Made in USA/ Industry Grade 
重量: 524公克

3M adhesive remover - natural ingredient, in compliance with FDA21  & CRE 180.20. It is a citrus oil based cleaner that emulsifies when flushed with water. It help to remove adhesive & stain. Aerosol cleaner which can dissolve and flush away dirt, grease, tar, most non curing tape adhesive films, and similar substances.

Key Features
- Remove grease, adhesives, tar and similar substrates from surfaces.
- Non-corrosive.
- May be used in food processing plants.
- Removes adhesive residue from most surfaces.
- Cleans grime from garage floors.
- Prepares surfaces for adhesive bonding.



3M Novec Fluid HFE-7100 清潔 導熱 溶劑


3M Novec fluid HFE-7100 清潔

Novec fluid HFE-7100 is used in a diverse range of industries. Its convenient boiling point and excellent environmental, health and safety profile make it useful in applications like heat transfer, cleaning, lubricant deposition and more.

1. Carrier Solvents for Fingerprint Formulations 指紋成形

2. Cleaning Fluids 清潔
Its boiling point (61C) and increased solvency make Novec fluid HFE-7100 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Low surface tension helps it to penetrate into tight spaces found in delicate electronic equipment - providing a thorough and complete clean.  HFE-7100 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP).   Depending on the type of soil to be cleaned, Novec fluid HFE-7100 can be used "neat" or in combination with other solvents. The product is compatible with most metals, plastics and elastomers

3. Deposition Solvents 溶劑
Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M  Performance Fluid PF-5060DL. In addition, Novec fluid HFE-7100 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid HFE-7100 delivers good solvency for PFPE lubricants and can dissolve high performance lubricant additives such as X-1P.


4. Heat Transfer Fluids 導熱
A wide liquid range (-135C to 61C) makes Novec fluid HFE-7100 well-suited to thermal management applications in a wide array of industries. In the semiconductor industry, it's ideal for automated test equipment (ATE) and wafer processing equipment requiring low temperatures.  Novec fluid HFE-7100 has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.

中央商業有限公司 Power Hub Inc.