^{3M Scotchcast 72-N Series Signal and control Inline Splicing Kits 72-N1 72-N2 72-N3 72-N4 72-N5 72-N6 直路灌膠接頭 防水中間接頭}

3M Scotchcast 72-N series kits splice shielded or nonshielded plastic - and rubber-jacketed, signal and control (or power) cables rated up to 1 kV.

   72-N1 Nonshielded cable only.

每一接頭包含下列組件：
1組 外膜（mold）
1卷 膠帶23（tape 23）
1條 砂布（abrasive cloth）
1袋 絕緣防水膠（2104 compound）
Jumper wire ( not for 72-N2)

此組件不包含壓接套管（connector）

^{3M Scotchcast resin joint kits 92-NBA x 灌膠式防水中間接頭 Resin Kit 92-NBA 0 up to 92-NBA 7 Inline Joint Kit Series with Resin 40}

3M  Scotchcast  resin joint kits 92-NBA x are designed to be used for 1-core up to 5-core non shielded, polymeric, low voltage energy cables up to 0.6/1 (1.2) kV. 3M  Scotchcast  resin inline joint kits contain a one-part transparent mould body for simple and easy handling and so distances inside the body can be checked easily. Also included is 3M  Scotchcast  40 Polyurethane resin, delivered in a two-chamber bag with an integrated spout and aluminium guard bag for protection against humidity.

適用電纜外徑 min-max    Cable outside diameter (mm)

* Resin 40 comes in two transparent chamber bags with an integrated Closed Mixing and Pouring (CMP) system.
* One-part mould body with a snap fit closing system for quick and easy handling.
* Transparent mould body for easy control of connector distances in the joint.
* Web spacer for 4-core cable application to ensure the distance between connectors for sizes NBA 1 up to NBA 4.
* Pre-cut foam sealing elements to provide reliable sealing to the mould body without tooling for all cable application diameters.
* Abrasive sponge to clean and roughen the cable jacket.
* Closure cap to prevent any pollution.
 

Type of Test according to EN50393 Table 3 / I / A1        Results
AC Voltage Withstand Test in air 4kV AC/ 1 min           passed
Insulation Resistance Test in air 1kV DC                      > 10.000MΩ
Heat Cycle in air 63 cycles: 5h/3h                               passed
Heat Cycle in water 63 cycles: 5h/3h                           passed
AC Voltage Withstand Test in water 4kV AC/ 1 min      passed
Insulation Resistance Test in water 1kV DC                 > 10.000MΩ