Product>>Tape>>3M Electrical Insulating & Splicing Tape
3M Electrical Tape Selection 3M電力膠帶選擇
3M Rubber Splicing Tape 2151 2151 Electrical tape is a highly conformable, 0.51mm Thick, self-fusing EPR (Ethylene Propylene Rubber) based low voltage jointing tape. 3M 2151 Rubber Splicing Tape is a conformable self-fusing rubber electrical insulating tape. It is designed for electrical insulating and moisture sealing applications.
Product Description
Typical Properties
Installation * 3/4"x30' (19mmx9.1m) or 1-1/2"x30' (38mmx9.1m) / 100 pcs in a case 超效絕緣防水二合一 延展性佳 69KV以下各種電力絕緣 終端及接續的處理
厚0.51mm
顏色: 黑 |
3M Scotch Linerless Rubber Splicing Tape 130C RoHS 130C is a highly conformable, linerless Ethylene Propylene Rubber (EPR), high-voltage insulating tape that provides excellent thermal dissipation of splice heat. Scotch 130C meets industry specifications and has excellent physical and electrical properties, which helps provide immediate moisture seal and void-free buildups. Scotch 130C is rated up to 194°F (90°C) continuous operating temperatures and short term 266°F (130°C) overload service. Features: Non-vulcanizing and highly conformable U.V, weather and corona resistant Not Flame retardant. Self-almalgamating tape Applications : Primary electrical insulation for cable jointing and terminating up to 69kV with up to 90°C continuous operating temperatures and 130°C emergency overload temperature Moisture sealing electrical connections. Bus bar insulations. End sealing high-voltage cables * 3/4"x30' ( 0.76mmx19mmx9.1m) / 24 pcs in a case * 1"x30' ( 0.76mmx25mmx9.1m) / 24 pcs in a case |
3M Scotch Electrical Semi-Conducting Tape 13 RoHS This 30 mil semi-conductive, linerless Ethylene Propylene Rubber (EPR) tape is highly conformable and is compatible with cable semi-conducting jackets. The soft, black rubber tape is a 0.762mm thick, highly conformable, semi-conducting EPR (Ethylene Propylene Rubber) based high-voltage splicing tape. It is non-vulcanising and shelf stable, with stable conductivity over a wide temperature range. Its conductivity is not affected, except by low-viscosity oils. The conductivity of cable semi-conducting jackets is not affected by 13 Tape. Features: Remains stable at 130°C and is non-vulcanising Elongates easily to form irregular shapes Resist cracking, solvents, U.V and moisture Tape and liner boldly printed to distinguish from insulating tape Meets requirements of ADTM-D4388, Type IV Application: Electrically rounds-off high voltage connectors and lugs Provides screen continuation for high voltage joints and terminations Replaces semi-conducting layer beneath metallic shield of damaged cables Forms conductive portion of stress cones * 3/4" x 15' (19 mm x 4,57 m) / 10 pcs per box & 50 pcs per case |
3M Scotch Rubber Splicing Tape 23 (All Voltage Splicing Tape) RoHS This 30 mil (0.76mm) thick semi-conductive, linerless Ethylene Propylene Rubber (EPR) tape is highly conformable and is compatible with cable semi-conducting jackets. This is a highly conformable, Ethylene Propylene Rubber (EPR) with liner for high-voltage insulating tape that provides excellent thermal dissipation of splice heat. This tape works properly up to 90 degrees C. Primary electrical insulation for splicing all solid dielectric cables through 69kv. * Primary electrically round out high voltage connectors, bolted connection. Shielding & retain conductivity with stretch insulation for all wire and cable splices. * Primary insulation for building stress cones on cables up to 35kV Primary electrical insulation for cable jointing and terminating up to 69kV with up to 90°C continuous operating temperatures and 130°C emergency overload temperature * 3/4" x 30' (19 mm x 9,1 m)/1" x 20' (25 mm x 6,1 m)/1" x 30' (25 mm x 9,1 m)/1-1/2" x 30' (38 mm x 9,1 m)/2" x 30' (51 mm x 9,1 m) Inner pack unit of 1 roll per box and 10 per carton with 50 per case. |
3M FIT Rubber Splicing Tape 絕緣膠帶 3M FIT Splicing Tape www.phi.com.tw 3M FIT Splicing Tape is a conformable rubber electrical insulating tape. It is designed for electrical insulating and moisture sealing applications, bus bar or termination.( Made in Japan) FIT tape is a Polyethylene backing/mastic laminated tape used for low and high voltage electric insulation. Black Color / high insulation / Rubber Adhesive system / Polyethylene Backing / superior weather resistance * Backing - PE (Polyethylene) * Mastic: Butyl Rubber base Compound * Halogen Free * Primary electrical insulation for all wire and cable splices. * tensile strength: 10N/10mm * Operating temperature: 90℃ * Dielectric Breakdown: 10KV/mm * Elongation (% at break): 450% * 0.5mmx20mmx10M / 200 pcs per case
3M 住友 FIT高壓絕緣防水膠帶 耐氧化亀裂、耐老化性、耐候性佳 日本製
電纜頭, 匯流排絕緣, 接續絕緣,
電纜終端, 中間接頭處理及架空絕緣線的防水密封用.
符合日本 JCAA D004標準 聚乙烯 Polyethylene (PE)底材 丁二烯橡膠膠系 尺寸:0.5mmΧ20mmΧ10公尺(厚Χ寬Χ長) 古河#2 同功能
|
3M Scotch 24 Electrical Shielding Tape RoHS Tape 24 is an all-metal, open-weave, shielding braid tape in a flat, cable-like form. It is conformable due to the open-weave knit construction of two No. 36 AWG tinned copper wires. Tinned copper conductors / Stable / Oil Resistant / Compatible with power cable insulations / Fire resistant / Corrosion resistant / Compatible with all high-voltage splicing and termination materials / Interlocks with the previous layer (no solder bead is required). To
provide shielding for cable joints on shielded power cables / To make
the conductive portion of the stress cone * 1" x100' (25 mmx30.5 m) or 1" x15' (25 mmx4.6 m) / 10 pcs per box & 50 pcs per case
Scotch 24 Tape should not be used as a ground strap or jumper wire. Its
ampacity is not great |
3M Scotch Self-Fusing Silicone Rubber Electrical Tape 70 RoHS This is a high-temperature, arc-and track-resistant tape composed of self-fusing, inorganic silicone rubber with an easy-tear and easy-strip liner. Packed 1 per box, 10 per carton with 50 per case. As an over-wrap for protection of terminating high-voltage cables against arcing and tracking. Excellent track resistance & arc resistance & ozone resistance / High dielectric strength / Class H material (180°C / 356°F continuous operation) / Workable at extremely low temperatures / Excellent conformability / Excellent instantaneous fusion / thickness of 12 mils. * Wrap with moderate tension ( 10 to 100% elongation). Apply last lap with zero stretch. Press down to avoid end lifting before fusion take place. * 1 in x 30 ft x 0.012 in. (25.4 mm x 9,1 m x 0.3 mm) / 50 per case |
3M Scotch Fire-Retardant Electric Arc Proofing Tape 77 Tape 77 is designed to protect all types of electrical cables where exposed to potential failures of other high voltage cables or exposed to other high energy cables. This 30 mil fire-retardant tape is designed to protect cable until limiting devices can interrupt faulted current. This insulating shield protects the cables and accessories from fault arc generated heat and flames. All adjacent wrapped cables and accessories are protected when exposed to fault arcs until limiting devices can interrupt the faulted circuit. To arc proof high-energy power cables where exposed to failures of other high-energy cables. (Any cables within 18 inches are considered to be exposed). To arc proof control cable when high energy power cables are present. Provide additional electrical insulation, thus reducing possibilities of transferred arcs. * 1-1/2" x 20' (38 mm x 6,1 m) or 3" x 20' (76 mm x 6,1 m) / 10 per case * RoHS Directive does not apply * Use Tape 69 to secure tape 77 which does not contain adhesive. |
3M Scotchfil Electrical Insulation Putty
Scotchfil Electrical insulation putty is a 3.175mm thick electrical grade
compound in tape form. It is UL Recognised as a joint insulation for
electrical conductors at temperatures up to 80°C (176°F) when over wrapped
with either Super 33+ or Super 88 Vinyl Electrical Tape. Non-corrosive, synthetic rubber Excellent electrical properties Excellent ageing properties Will not dry out Applies cleanly without waste Applications To insulate low-voltage (600 volts and less) connections To build up cable joints and fill out major irregularities and voids in low-voltage joints(2300 volts and less) in order to obtain a uniform base for further taping To round out high-voltage connections to gear To smooth bus bar irregularities To create a resin dam in resin pressure joints To create a moisture seal at ground wire exit in high-voltage joints To moisture seal multi-conductor cable connections * 1/2 in x 60 in (38 mm x 1,53 m), 125 mil, 12 per case Ingredient: BUTYL RUBBER, AMORPHOUS SILICA, MINERAL OIL, POLYETHYLENE, POLYISOBUTYLENE, TACKIFIER, CARBON BLACK |
3M Rubber Splicing Tape J20 自黏 絕緣防水膠帶 日東 15 同功能
|
3M Tape Wrapping Tips 3M 膠帶纏繞技巧 |
|
Type of Tape |
Number of Layers/Application Instructions |
Vinyl Electrical - Jacketing and Mechanical Protection PVC電氣膠帶 外表保護和機構性保護 |
Always use a minimum of two half-lapped layers. The last layer should be wrapped in a more relaxed manner -- let the last wrap relax to prevent the layer from flagging.膠帶一半寬度層層搭接 至少使用兩層。最後一層應以更寬鬆的方式纏繞 - 讓最後一段結束纏繞時,以放鬆無張力方式貼上,以防止該段鬆脫。 |
Rubber Tapes - Electrical Insulation, Mechanical Padding, Water Sealing and Shaping 橡膠膠帶 - 電氣絕緣、機械填充、防水和填充成型 |
Wrap tape tightly to achieve the water tight seal. Rubber tapes are typically overwrapped with vinyl tape. 緊緊纏繞膠帶以實現防水密封。橡膠膠帶通常用PVC膠帶包裹。 |
High Voltage Tapes - Insulating and Semi-conductive Layers 高壓膠帶 用於絕緣層和半導體層 |
Apply outside of roll to the cable, in highly stretched half-lapped layers. Never use a semi-conductive tape as an insulation. 將膠帶拉開伸展 以膠帶外側面貼在電纜上 一半寬度層層搭接。勿使用半導體膠帶作為絕緣膠帶。 |
Mastic Compounds - Insulating, Mechanical Padding, Moisture Sealing and Shaping 膠泥化合物膠帶 - 絕緣、機械填充、防潮密封和成型 |
Mastic compounds are to be overwrapped with vinyl tapes to initiate flow and watertight seal. Do not apply excessive amount of mastic to prevent oozing. 膠泥化合物膠帶纏繞好時 應該用PVC膠帶再包裹 使其具有撥水流動性和防水密封性。不要用過量的膠泥以防止滲漏。 |
中央商業有限公司 Power Hub Inc.