Product Index

Product >> Tape >> 3M Electrical Insulating & Splicing Tape 高壓絕緣防水膠帶>> 3M Rubber Splicing Tape 2151 自融性絕緣防水膠帶

3M膠帶  

3M Rubber Splicing Tape 2151 絕緣防水膠帶 日東 15 同功能

2151 Electrical tape is a highly conformable, 0.51mm Thick, self-fusing EPR (Ethylene Propylene Rubber) based low voltage jointing tape. 3M 2151 Rubber Splicing Tape is a conformable self-fusing rubber electrical insulating tape. It is designed for electrical insulating and moisture sealing applications.

 

Product Description
3M  2151 Rubber Splicing Tape is a conformable, self-fusing rubber electrical insulating tape,
manufactured from ethylene-propylene rubber (EPR). Suitable for applications up to 69kV.


Product Features
 High insulation properties
 Excellent conformability
 Excellent sealing properties
 Excellent and fast self-bonding without blistering
 Excellent tensile strength and elongation allowing easy application

Typical Properties
Thickness (mm) 0.51
Colour Black
Tensile Strength (Mpa) 1.7
Elongation (%) 700
Dielectric Breakdown (kV/mm) 28
Dissipation Factor (23°C) 0.05 max
Dielectric Constant / Permissiveness (23°C) 4.0 max
Insulation Resistance (MὨ) 1014
Continuous Operating Temperature (°C) 90
Emergency Overload Temperature (°C) 130
Note: These are typical values and should not be used for specification purposes

Installation
3M  2151 Electrical Tape should be applied in successive half-lapped, level-wound layers until desired build-up is reached. To eliminate voids in critical areas, highly elongate the tape. Stretch the tape in these critical areas just short of its breaking point. Doing so will not alter its physical or electrical properties. In less critical areas, less elongation may be used. Normally, 2151 Tape is stretched to ¾ of its original width in these less critical areas. Always attempt to half-lap to produce a uniform build-up. When using 2151 Tape for splicing cables from 35kV to 69kV, always elongate the tape throughout the entire splice.

* 3/4"x30' (19mmx9.1m) or 1-1/2"x30' (38mmx9.1m)  / 100 pcs in a case

超效絕緣防水二合一  延展性佳    69KV以下各種電力絕緣  終端及接續的處理

厚0.51mm
EPR基材
為一自融性,抗電暈的絶緣膠帶
可用來做為69KV以下塑膠絶緣電纜接頭的主絶緣
也可用來做35KV以下電力錐的材料,匯流排絕緣處理,管路之防漏及修補
耐溫達130℃
本膠帶符合UL之標準

顏色: 黑
延伸性:700%
操作溫度:90°C
介電強度: 28 KV/mm

 

   

3M Rubber Splicing Tape J20  自黏 絕緣防水膠帶 日東 15 同功能


liner 離型纸易撕,易操作;防水性能良好;通过RoHS


•10KV以下電纜的絕緣防護   •低應力中間接頭和終端護套恢復  •電氣連接的防潮密封  •電纜端部封合


颜色:黑色

规格:W25mm)×L5m× T0.7mm(厚)

电压等级:10KV及以下

抗拉强度:250Psi

延伸率:500%

温度等级:80℃


重量: 每卷0.08kg      100卷/箱       50*32*21 CM   Made in China
 

中央商業有限公司 Power Hub Inc.