^{3M Scotchrap 50 & 51 Corrosion Protection Tapes RoHS}

Scotchrap 50 and 51 Tapes are tough, polyvinyl chloride based tapes with special high tack adhesives formulated to resist corrosion of metal piping systems above and below ground, fittings and joints on all millcoated pipe and electrical conduit systems.

Features: • Resists abrasion, moisture, corrosive salt water, soil acids, and alkalis and salts • Resistant to common chemicals, chemical vapours • Resistant to outdoor weathering and sunlight • Resistant to impact, abrasion, punctures and tears • Both tapes have high electric strength, and excellent insulating properties. • Continuous operating temperature range from -48°C to 80°C (176°F) • Application temperature from -12°C to 65.6°C

Applications: • Protection of metal pipe systems both above and below ground. • Use Scotchrap Pipe primer to prepare surfaces for tape application • Use Scotchfil Electrical Insulation putty* to build up irregular surfaces to provide a smooth, waterproof taping surface

* With Various Sizes to Choose ( Width from 1" ~ 6")

^{3M TemflexE 1100 1100P 經濟版防腐膠帶}

TemflexE 1100 and 1100P (Printed) tapes are made of tough, polyvinyl chloride (PVC), expecially formulated
for corrosion protection of pipes, conduits and metallic cable jackets.

They are easy to apply and provide excellent protection against abrasion, puncture, corrosion and electrolytic action both above and below ground. These tapes resist corrosion caused by acids (e.g. sulfuric, hydrochloric, phosphoric), alkalis and other corrosive materials, including compounds of chlorine, bromine, sodium and lithium. They also resist salt water and sunlight.

Features: Resistance to galvanic and electrolytic action / Excellent abrasion resistance / Good impact and tear resistance / Resistance to weather–induced cracking and checking / High electrical strength / Excellent insulation resistance / UV resistant and temperature-rated to 176°F (80°C).

The plastic tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a specially formulated rubber–based, pressure–sensitive adhesive. The tape must be applicable at temperatures ranging from 10°F to 120°F (–12°C to 49°C) without loss of physical or electrical properties. The tape has the capabilities to be used in, both indoor and outdoor environments. The tape shall be compatible with all standard mill coated pipe and must not crack, split, slip or flag when exposed to various environments.

Applications: Corrosion protection above and below ground / Corrosion protection of conduit, pipe and systems subjected to abrasion, corrosion, electrolytic action / Corrosion protection of fittings and joints on mill coated pipe / Moisture sealing of threaded conduit joint.

Dielectric Strength:  10,000 Volts
Insulation Resistance: >10000000 Megohms
Thickness:  10 mils
Elongation:  200%
Breaking Strength: 25 lbs/in

TemflexE 1100 1100P 經濟版防腐膠帶
防腐蝕, 酸, 鹼、耐磨、抗衝擊  額定溫度:80℃

^{3M PTFE Pipe Thread Sealant Tape 止洩帶 similar to  3M Tape 48}

3M PTFE Pipe Thread Sealant Tape is a milky white unfused plastic film made of PTFE fluorocarbon resin. High-temperature-stable (PTFE) pipe thread sealant that provides a leak-proof seal with a temperature rated to 403°F 206°C.

聚四氟乙烯, Teflon, 特氟龍:耐高溫, 絕緣, 防腐蝕,耐老化,抗微波,自潤滑. 在極大溫差時，物理及電氣性能仍保持不變. 用於螺牙防漏，改善緊密度. 裝置水桶龍頭時，止洩帶可確保不漏. 必須採用相對於螺紋做逆向纏繞，也就是順時針方向.

3M Tape 48  not in stock...

^{3M Duct Tape 6969 防水膠帶   無鉛 RoHS}

Industrial grade duct tape. Polyethylene coated cloth backing with rubber adhesive. Ideal for sealing, holding, protecting from moisture, temporary repairs and general maintenance activities.

Typical physical and performance characteristics include; thickness: 10.7 mil, adhesion to steel: 62 oz/in, tensile strength: 32 lb/in width, elongation at break: 16%, temperature use range: up to 200°F 93 °C for up to one hour.

• Strong waterproof backing for long term resistance to wear, abrasion, moisture, and weathering
• Tears easily straight across and down without curling
• Tack-free edges
• Surface can be written on

Application:
• HVAC, construction, abatement, and automotive applications 風管空調施工
• Duct insulation seaming and sealing密封
• Moisture-proofing, reinforcing, bundling 補強
• Securing and repairing tarps 固定

手可撕裂  易操作 抗潮  可黏於多種表面 高強度 伏貼性佳 多功能及多用途  灰色 黑色
 

 48 mm x 54.8 m, 10.7 mil, 24 per case,  以 24 pcs 為單位出售

6969 應用Polyester布料的服貼性加上橡膠樹脂的保持力，使3M玻纖布膠帶6969很適合應用在密封隔絕及導管間的接合

6969 為工業級超強大力防水膠布, 比130DC堅固,  130DC (Home & Shop Duct Tape) 家庭用大力膠布

^{3M 工業級大力膠帶 8979}

I•持續６個月貼附後撕除不殘膠
•防水, 抗UV
•一年以上抗老化
•高強度,可黏於多種表面
•伏貼性佳，多功能及多用途
•易撕好操作
•膠帶邊緣不溢膠
 

期貨 需要訂購 Tape 8979黑   48MM*54.8M

^{3M 471 Vinyl Floor Marking Tape 471  4712 Rubber Adhesive}

3M Vinyl Tape 471 and 4712 are a conformable colored (9 colors plus transparent) vinyl backing with a rubber adhesive ideal for many lane and safety markings, color coding, abrasion protection, masking, sealing, splicing and other general purpose applications. 3M vinyl tape 4712 is a linered version of 3M vinyl tape 471 that may be used for die cutting applications.

• Ideal for masking, wrapping or sealing many curved or irregular surfaces.
• Excellent for many lane and safety marking applications.
• Ideal for color coding, abrasion protection, decoration and splicing applications.

All colors except transparent - 非透明

Adhesion to Steel: 23 oz./in. width (25 N/100 mm)
Tensile Strength at Break: 16 lbs./in. width (280 N/100 mm)
Elongation at Break: 130%
Backing Thickness: 4.1 mils (0.10 mm)
Total Tape Thickness: 5.2 mils (0.13 mm)
Temperature Use Range: 40° to 170°F (4° to 77°C)

Transparent - 透明 :
Adhesion to Steel: 26 oz./in. width (28 N/100 mm)
Tensile Strength at Break: 16 lbs./in. width (280 N/100 mm)
Elongation at Break: 180%
Backing Thickness: 4.1 mils (0.10 mm)
Total Tape Thickness: 5.4 mils (0.14 mm)

抗濕氣、磨損、腐蝕, 溫度範圍從 0°C至77 °C

3M Vinyl膠帶471有11種顏色, 黃,綠,紅,藍,白,黑,透明 橘色 橙 都有貨, 具標記地板marking的功能, 33M

精緻漆線遮蔽　Vinyl基材之優異低回復性，結合堅硬橡膠膠系之抗轉印性，使得 3M Vinyl膠帶471(藍)在卡車製造時烤漆線性能表現極佳

顏色標示與辨識　3M Vinyl膠帶471 顏色鮮豔，結合堅硬且迅速黏著之橡膠膠系， 使得本產品滿足顏色標示與辨識的需求

走道標示與危險辨識　具有4 mil之基材厚度的3M Vinyl膠帶471、5700(黑/白)與5702(黑/黃)， 其耐久度與耐磨性滿足了安全標示的需求

^{3M Scotch Cellophane Film Tape 610 測試膠帶}

Scotch Cellophane Film Tape 610 is a high performance, transparent cellophane film tape featuring a high tack adhesive system. This product offers excellent adhesion, dispensing and handling properties.

High-performance, clear cellophane film tape. High-tack rubber resin adhesive system. Excellent adhesion, dispensing and handling characteristics. Temperature resistant.

• Dimensionally stable on the application up to 300ºF (140ºC)
• Easily dispensed.
• Excellent holding properties.
• Immediate adhesion to a variety of substrates.
• Controlled consistent unwind for reliable hand dispensing..

Backing: Cellophane Film

Adhesive: Pressure Sensitive Rubber Resin

Size: 1/4", 3/4”, 1” and others
Color: Transparent

Adhesion to Steel: 43oz/in. width (47 N/100 mm)
Elongation at Break: 15%

Tape Thickness:

Backing 1.43 mil (0.036 mm)    / Total 2.3 mil (0.058 mm)

Tensile Strength:

Machine Direction 23 lbs./in width (402N/100mm)   /    Cross Direction 40 lbs./in width (700N/100mm)

^{3M Scotch Transparent Film Tape 600 測試膠帶}

Scotch  Tape 600 is a transparent film tape that is excellent for various packaging applications. It has a pressure sensitive acrylic adhesive system which is long aging and highly transparent, so it has stain and sunlight resistance which makes it an excellent choice for use on fabrics. Recommended for gift-wrapping, combining, attaching, light duty carton sealing and miscellaneous store use.

• Easy-release treated.
• Meets CID A-A-113 Type 1 Class A.
• Moisture and chemical resistance.
• Roll stability.
• Long aging.
• Controlled, smooth unwind.
• Unaffected by changing atmospheric conditions and resistant to many acids,
alkalies and solvents.
• Has good edge tear and breakage resistance.
• Easy to read through.
• Excellent holding and good dispensing properties.
• Does not yellow on fabrics.

Backing: 3M Paklon film

Adhesive: Pressure sensitive acrylic

與 3M Tape 600 比較

當產品的製程上需要『電鍍』、『印刷』、『噴烤漆』時，測試塗佈材料附著力的強弱，是品管的必要程序。3M 600及610測試膠帶的特色在於，初期黏性與終期黏性之間的高穩定度，可藉由世界印刷電路板協會 (IPC)的百格測試方法，對於塗佈材料附著力的強弱做測試，其測試結果將是您重要的參考依據！

3M美國進口工業用600及610測試膠帶，為世界印刷電路板協會 (IPC) 建議使用，並符合CID AA-113 Type 1, Class B之規範，此規範詳述表面處理附著性測試用膠帶之相關細節。

工業用600及610測試膠帶使用範圍非常廣泛，凡需測試: 電鍍  印刷  噴烤漆  印刷電路板  之各種塗佈材料之附著品質，建議使用3M工業用600及610膠帶測試。Made in USA原產地為美國
膠帶在生產過程或轉加工之分條裁切時產生之差異，亦或在運輸儲存不同之條件下，有時會造成外觀目視不甚美觀之情形，例如：輕微色差、氣泡、魚眼、輕微皺摺、波紋、凸起、間隙、凸捲等，膠帶功能性不因膠帶外觀而有所影響。

與 3M Tape 600 比較

600：珍珠白 / 無外包裝
610：琥珀色 / 收縮膜
 

^{3M 616 平板印刷用膠帶 遮光膠帶 Lithographers Tape}

3M Lithographers Tape 616 is an optically transparent and photographically opaque tape.

Backing: Unplasticized polyvinylchloride (UPVC)

Adhesive: Rubber

Color: Ruby Red

Adhesion to Steel: 36 oz./in. width (39 N/100 mm)
Tensile Strength at Break: 29 lbs./in. width (509 N/100 mm)
Elongation at Break: 50%
Backing Thickness: 1.6 mils (.04 mm)
Total Tape Thickness: 2.4 mils (.06 mm)

• Ruby Red UPVC film backing to allow accurate positioning.
• Resists affects of changing atmospheric conditions to allow repeated and extended “burn” times.
• Low caliper backing to minimize ghosting and provide sharper definition.
• Pin-hole free backing to provide continuous opacity to light source to help minimize retouching.
• Firm adhesive which is long aging and resistant to softening to resist oozing during application and storage.

 Opaquing, stripping and edging. / Splicing. / Graphic Arts / Printed Circuit Board; Paper.

平板印刷遮蔽　寶紅透明 UPVC 基材為半透明，但可用於攝影底片之遮蔽，以此基材之特性 及結合耐久性不殘膠之膠系，3M平板印刷用膠帶616在平面藝術工業裡，非常適合平板印刷之應用。 照像製版用 工業測試用

^{3M Scotch Box Sealing Tape 373 封箱膠帶  無鉛 RoHS}

ITape 373 is a high performance packaging tape used for box sealing, splicing, recouperage and other demanding packaging applications. This product has a heavy duty, conformable backing and the most consistent pressure sensitive hot melt adhesive system available. This time proven construction assures
high performance in a wide range of environments and applications.

Backing: Biaxially oriented Scotchpro polypropylene film

Adhesive: 3M Pressure sensitive hot melt rubber-resin

Colors: clear,  Blue, green, orange, red, tan, white, and yellow

Adhesion to Steel: 50 oz./in. width (55 N/100 mm width)
Tensile Strength:
Machine Direction: 30 lbs./in. width (525 N/100 mm width)
Cross Direction: 60 lbs./in. width (1050 N/100 mm width)
Elongation at Break: 160%
Thickness - Backing: 1.6 mil (0.041 mm)
Total: 2.5 mil (0.064 mm)
Holding Power to Fiberboard: 8,000 + minutes

Adheres instantly to most surfaces including cartons containing high levels of recycled content.  Heavy duty, conformable backing with higher edge tear and split resistance. RoHS ok.

3M 373 封箱膠帶 透明 符合 RoHS  很適合應用在出口歐盟包裝

^{3M Scotch Box Sealing Tape 375  封箱膠帶  無鉛 RoHS}

Tape 375 is a superior performance packaging tape used for box sealing, splicing, recooperage and other demanding packaging applications. This product has the strongest conformable backing and the most consistent pressure sensitive hot melt adhesive system available. This time proven construction assures
superior performance in a wide range of environments and applications.

Backing: Biaxially oriented Scotchpro polypropylene film

Adhesive: 3M Pressure sensitive hot melt rubber-resin

Colors: clear,  tan

Adhesion to Steel: 55 oz./in. width 60 N/100 mm width)
Tensile Strength:
Machine Direction: 35 lbs./in. width (613 N/100 mm width)
Cross Direction: 70 lbs./in. width (1226 N/100 mm width)
Elongation at Break: 160%
Thickness - Backing: 2.0 mil (0.051 mm)
Total: 3.1 mil (0.079 mm)
Holding Power to Fiberboard: 12000 + minutes

• Pressure sensitive hot melt rubber-resin adhesive.
• 3M  Scotchpro biaxially oriented polypropylene backing.
• Meets CID A-A-1684B and ASTM D5486 Type III.
• Considered water-resistant as per ASTM D5570.
• Adheres instantly to most surfaces including cartons containing high levels of recycled content.
• The strongest conformable backing with the highest edge tear and split resistance.
• Complies with the environmental considerations of ASTM D 1974-92.
• Superior performance ensures reliable closures.
• FDA approved for indirect food contact.

An extensive line of application equipment including hand held manual dispensers and semi-automatic and fully automatic equipment is available. Application of Scotch Superior Performance Box Sealing Tape 375 is most easily accomplished at room temperature. At colder temperatures, approaching 32°F (0°C), the adhesive becomes more firm. Once applied, Scotch Tape 375 performs well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage requirements.

3M 375 封箱膠帶 透明 較373黏 符合 RoHS  很適合應用在出口歐盟包裝  寬度 36 mm, 48 mm, 72 mm 長50M

^{3M Scotch Magic Tape 810}

Scotch Magic Tape is the original matte finish, invisible tape. It is the preferred tape for offices, home offices and schools. Writable with pen, pencil or markers. The original matte finish tape that is invisible on most office papers. Ideal for permanent paper mending and splicing. Pulls off the roll very easily, resists splitting and tearing.

The original matte finish tape that is invisible on most office papers.  Ideal for permanent paper mending and splicing.  Pulls off the roll very easily, resists splitting and tearing.

^{3M Polyethylene Tape 5425  助滑 降低摩擦 光滑表面}

是3M UHMW (Ultra High Molecular Weight ) PE 膠帶，即超高分子量聚乙烯薄膜膠帶，藉由其低磨擦係數，耐磨損，耐撞擊的特性，不但能促進接觸部位的平滑效果，更能有效減少刺耳的噪音，因而明顯提高產品品質並延長產品使用期限。

3M UHMW Polyethylene Tape 5425 is a film coated with a special acrylic adhesive that is resistant to many solvents.

Adhesion to Steel: 30 oz./in. width (33 N/100 mm) D-3330
Tensile Strength: 45 lbs./in. width (788 N/100 mm) D-3759
Elongation at Break: 100% D-3759
Backing Thickness: 3.0 mils (0.08 mm) D-3652
Total Tape Thickness: 5.0 mils (0.13 mm) D-3652 (without liner)
Liner Thickness: 3.2 mils (0.08 mm) D-3652
Temperature Use Range: -30° to 225°F (-34° to 107°C)

磨擦係數低: 低磨擦係數僅次於氟樹酯，具自我潤滑性
耐磨損: 能長期維持平滑性及低磨擦性 堅固性佳，耐撞擊
低表面能基材: 具優異之離型性，不易附著其他物質
 

^{3M Polyethylene Tape 5423 5421 PE Tape 助滑膠帶}

3M Polyethylene Tape 5421 and 5423 has a rubber adhesive which provides an excellent abrasion resistant surface. 助滑膠帶

Backing: Ultra-high molecular weight polyethylene

Adhesive: Rubber

Liner: 60# densified kraft

Color: Translucent

Length: 18 yds. (16.4 m)
 

3M tape 5421
Adhesion to Steel: 26 oz./in width (28 N/100 mm) D-3330
Tensile Strength: 30 lbs./in. width (526 N/100 mm) D-3759
Elongation at Break: 275% D-3759
Backing Thickness: 5.0 mils (0.13 mm) D-3652
Total Tape Thickness: 6.7 mils (0.17 mm) D-3652 (without liner)
Liner Thickness: 3.5 mils (0.09 mm) D-3652
Temperature Use Range: -30° to 225°F (-34° to 107°C)

3M tape 5423
Adhesion to Steel: 26 oz./in width (28 N/100 mm) D-3330
Tensile Strength: 55 lbs./in. width (963 N/100 mm) D-3759
Elongation at Break: 300% D-3759
Backing Thickness: 10 mils (0.25 mm) D-3652
Total Tape Thickness: 11.7 mils (0.30 mm) D-3652 (without liner)
Liner Thickness: 3.5 mils (0.09 mm) D-3652
Temperature Use Range: -30° to 225°F (-34° to 107°C)

• Thick caliper UHMW polyethylene tape for extended service life as a protective
surface against extreme wear.
• UHMW polyethylene is a thermoplastic that has a unique combination of properties
which make it ideal for many tough impact wear or sliding applications.
• Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.
• Outstanding abrasion resistance so will outwear many types of PTFE and other
materials in sliding applications.
• Low coefficient of friction exceeded only by the PTFE’s.
• Self-lubricating so can often be used where lubrication is not possible because of
contamination.
• Sound damping for high energy absorption capacity helps reduce noise levels in
machinery and equipment.

Applicatoin

• Conveyor flat guide rails • Spray booth liners • Discharge chutes • Tank and bin liners • Doctor blades • Drawer and cabinet slides • Former noses • Feed and grain chutes • Protecting aluminum sheets on stretch forming presses

UHMW-PE (超高分子量 PE)膠帶: 3M UHMW-PE膠帶5423 3M UHMW-PE膠帶5421

• 抗磨耗　超高分子量PE膠帶可保護塑件及金屬導體、導引軌道及容器等磨耗。

• 低摩擦係數度　此性質在加上抗磨耗的特性，可提供許多噪音及震動等問題上，相當有效的解決方案。

• 抗黏及離形能力　超高分子量PE膠帶在許多塗佈及黏貼的應用上，如多種的油墨、膠水或密封劑， 提供簡單的表面清潔能力

低成本,服貼性佳,延長性好,耐磨性好, 可置於滾輪前端邊緣，以降低滾輪摩擦係數至最低， 如一體成型般。使用 5423 於導槽襯裡，瓦楞紙箱可輕易的滑下。

^{3M Dual Lock  Reclosable Fasteners 子母扣  黏扣帶 SJ3550CF SJ3550 SJ3541 SJ3542 SJ3560 SJ4570}

3M Dual Lock  子母扣系列產品能協助您隱藏式的貼合門、面板、指示牌、陳列版、及許多需要經常拆卸的物品。專利式的香菇頭設計提供媲美機械式固定的剪切力。針對不同需求，可選擇不同背膠搭配，滿足多樣性的應用需求。

•無背膠子母扣
•VHB超強黏性背膠子母扣
•薄型黏子母扣
 

Dual Lock reclosable fasteners can be engaged in the following combinations of increasing strength:
type 170 to type 250, type 170 to type 400, type 250 to type 250 and type 250 to type 400.

Clear Acrylic Adhesive
3M Dual Lock Reclosable Fastener 170 SJ3562
3M Dual Lock Reclosable Fastener 250 SJ3560
3M Dual Lock Reclosable Fastener 400 SJ3561

General Purpose Acrylic Adhesive
3M Dual Lock Reclosable Fastener 250 SJ3550  停產
3M Dual Lock Reclosable Fastener 170 SJ3552
3M Dual Lock Reclosable Fastener 170 SJ3562
3M Dual Lock Reclosable Fastener 250 SJ3550
3M Dual Lock Reclosable Fastener 250 SJ3560


Thin,SJ4570,sj4580;


Rubber Adhesive
3M Dual Lock Reclosable Fastener 170 SJ3542
3M Dual Lock Reclosable Fastener 400 SJ3541



Low Surface Energy (LSE) Material
3M Dual Lock Reclosable Fastener 170 SJ3542
3M Dual Lock Reclosable Fastener 250 SJ3540
3M Dual Lock Reclosable Fastener 250 SJ3870
3M Dual Lock Reclosable Fastener 400 SJ3541



Dual Lock Mini-Packs
3M Dual Lock Low Profile Reclosable Fastener MP4570
3M Dual Lock Reclosable Fastener System MP3541/MP3542
3M Dual Lock Reclosable Fastener System MP3551/MP3552
3M Dual Lock Reclosable Fastener System MP3560

sj3542v,sj3872,sj3871;sj3773,sj3540,sj3245,sj3461,sj3557,

sj3559,sj3557,sj3558,sj4575,sj4570,sj3773,sj3782,
SJ3442 170 Black, ,SJ3440 250 Black, SJ3441， SJ3782 ，

SJ3461 400 Clear,
SJ3463 400 Black,
SJ3445 250 Black,
SJ3460 250 Clear,

SJ3481 400 Black,
SJ3444 170 Black,
SJ3443 400 Black,

3M 子母扣
3M 子母扣密度：170、250、400
3M 子母扣背膠：橡膠膠系 - 雙面泡棉膠帶 /  壓克力膠系 - VHB壓克力泡棉雙面膠帶
3M 子母扣承受重量大小： 250+400 > 170+400 > 250+250 > 170+250
 

^{3M Conformable Sound Management Film Tape 9343 膠帶   pass FMVSS302}

3M Conformable Sound Management Film Tape 9343 is designed with a black, non-woven backing and acrylic adhesive on a polyester liner. The non-woven, microfiber backing is unique in that it provides conformability, elasticity, compressibility and durability. This tape is engineered to help reduce noise, vibration, squeaks and rattles in automotive interior applications.

Non-woven, microfiber backing offers conformability, elasticity, compressibility and durability

Conformable design provides a solution for irregular-shaped parts

Durable, abrasion-resistant backing maintains a long wear life, is die-cuttable and passes FMVSS 302

1. 不織布微纖維背層具有服貼度、彈性、可壓縮性和耐久性
2. 可服貼材質，適用於各式不規則形狀零件的黏著
3. 採用耐久抗磨背層，產品使用壽命長，可隨意切割，通過 FMVSS 302 規範
4. 適用溫度範圍從-34°C/-30°F到121°C/250°F
5. 有助於降低車廂內的噪音、摩擦、震動、機械碰撞聲和晃動
6. 壓克力接著劑具有優良的黏合強度