^{3M 4026 氨基鉀酸酯基材 雙面膠帶  Double Coated Urethane Foam Tape}

3M 4026  Double Coated Urethane Foam Tape, (1.6 mm) thick, are conformable foams that offer high shear strength and are available with either a high temperature holding acrylic adhesive system or a rubber adhesive system for bonding to various types of surfaces for mounting, joining and holding.

• The natural colored urethane foam tape products vary in color from white to light yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet radiation). This color change is normal and does not affect tape performance.
• 3M Double Coated Urethane Foam Tape 4026 is available in roll form and die-cut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either individual pieces double linered with an extended liner on one side or in pads of 48 squares.

• Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

UV Resistance: No apparent degradation when exposed to 7 days in U.V. chamber.

Adhesive Type: 100

Mount air fresheners and soap dispensers

於高溫或嚴苛之條件下, 有良好之表現.

膠帶厚度(不含離型紙):1.6 mm

膠系:100膠系

長期耐溫 (天, 週) 104°C (202°F)

 短期耐溫(分鐘, 小時) 193°C (380°F)

Size: 1.6mmx610mm*33M

3M 4032 氨基鉀酸酯基材 雙面膠帶 Double Coated Urethane Foam Tape  0.8mm thickness

3M  雙面膠帶  4004 4008 4016 4026 4032 4052 4056