^{3M Repositionable Tapes 666 重複貼雙面膠帶 可重工不殘膠膠帶 666}

3M Repositionable Tapes are double coated tapes that are ideal for applications where one or both parts need to be repositioned or removed easily.

3M Repositionable Tapes 665 and 666 have a medium tack adhesive on both sides of
the tape.
– Good adhesive anchorage to the film carrier provides one-piece tape removal from
many surfaces.
– Slight side-to-side adhesion differential, therefore specific side removal can be
accomplished if applied properly.
– The higher tack side of 3M tape 665 is on the face side (interior of roll).
– The higher tack side of 3M tape 666 is on the linered or back side (exterior of roll).
– The linerless feature of 3M tape 665 can help simplify manual or automatic dispensing.
No special liner removal equipment is required.
– The complete plastic construction of both tapes provides a hot wire cuttable feature for
plastic packaging.

Thickness:0.089 mm   Color: Clear      Temperature Operating Ranges:125°F (52°C)

Adhesion to Steel:   Faceside: 25 oz./in    Backside: 25 oz./in

基材 Carrier: UPVC

各側有相同的黏貼強度，但能重新對位，也可重覆黏貼

^{3M Acrylic Foam Tape 4229P 雙面膠帶 4229P   基材 Acrylic Foam}

3M 壓克力泡棉膠帶 4229P, 深灰色, T:0.76 mm, 紅色離型紙 適用於汽車等各類塑膠黏貼固定

3M Acrylic Foam Tape 4229P is a medium-density, dark gray acrylic foam tape with high performance acrylic adhesives. 3M acrylic foam tape 4229P is characterized by high performance peel and shear adhesion, high internal strength, good conformability and excellent plasticizer resistance. Typical applications include body side moldings; stainless steel, ABS and PVC rocker panels; wheel lip moldings, door edge moldings, nameplates/ ornamentation, luggage rack slats, wind and rain deflectors, and dashboard overlays. 3M acrylic foam tape 4229P utilizes the same proprietary acrylic foam core and adhesive technology that has been proven successful on numerous OEM automotive applications. The acrylic foam core has unique viscoelastic properties that allow it to elongate and relax when put under load, thereby minimizing stress on the adhesive bond line. These properties allow the tape to bond more effectively to a wide variety of automotive surfaces.

• 泡棉芯材可延展，可紓解接著劑端的應力，能有效地貼合於各式汽車表面材質
• 高性能的剝離和剪切黏性
• 內部強度高、服貼度佳、抗塑化劑侵蝕

3M 壓克力泡棉膠帶 4229P系列

感壓型雙面膠帶

厚度為0.76 mm (0.030 英吋)

灰色壓克力泡棉雙面膠帶

適用於貼合汽車外觀零部件如車身側面造型結構

離型紙為紅色的PE材質且印製3M Logo

^{3M Acrylic Foam Tape 4218P 雙面膠帶 4218P   基材 Acrylic Foam}

3M 壓克力泡棉膠帶 4218P, 深灰色, T:1.14 mm, 紅色離型紙 適用於汽車等各類塑膠黏貼固定

3M Acrylic Foam Tape 4218P is a medium-density, dark gray acrylic foam tape with high performance acrylic adhesives. 3M acrylic foam tape 4218P is characterized by high performance peel and shear adhesion, high internal strength, good conformability and excellent plasticizer resistance. Typical applications include body side moldings; stainless steel, ABS and PVC rocker panels; wheel lip moldings, door edge moldings, nameplates/ ornamentation, luggage rack slats, wind and rain deflectors, and dashboard overlays. 3M acrylic foam tape 4218P utilizes the same proprietary acrylic foam core and adhesive technology that has been proven successful on numerous OEM automotive applications. The acrylic foam core has unique viscoelastic properties that allow it to elongate and relax when put under load, thereby minimizing stress on the adhesive bond line. These properties allow the tape to bond more effectively to a wide variety of automotive surfaces.

• 泡棉芯材可延展，可紓解接著劑端的應力，能有效地貼合於各式汽車表面材質
• 高性能的剝離和剪切黏性
• 內部強度高、服貼度佳、抗塑化劑侵蝕

3M 壓克力泡棉膠帶 4218P系列

感壓型雙面膠帶

厚度為1.14 mm (0.045 英吋)

灰色壓克力泡棉雙面膠帶

適用於貼合汽車外觀零部件如車身側面造型結構

離型紙為紅色的PE材質且印製3M Logo

^{3M Double Coated Tissue Tape 7015 棉紙基材雙面膠帶}

特性

棉紙基材雙面膠帶7015 係以棉紙為基材，對於膠帶材切加工之尺寸穩定性佳，並於貼
合及沖切加工具有優異之作性，其壓克力膠系適合各種表面之貼合。
產品特徵：
1. 3M 7015為軟硬適中之感壓膠系統，具備高黏著強度與高保持力、剪切特性，並可
適用於多種表面，包含各式塑膠表面。
2. 3M 7015 於泡棉貼合應用中， 可提升泡棉之尺寸固定性，降低泡棉之延伸特性。
3. 高強度離型紙有利於膠帶沖切之加工流程。

2. 貼合表現：
對PP板黏性: (ASTM D3330, 180 度剝離) (Kg/in)
20 minutes RT 1.9
72 hrs RT 2.1
對不鏽鋼板黏性: (ASTM D3330, 180 度剝離) (Kg/in)
20 minutes RT 2.9
72 hrs RT 3.1
對ABS板黏性 (ASTM D3330, 180 度剝離) (Kg/in)
20 minutes RT 2.2
72 hrs RT 2.4
對PC板黏性 (ASTM D3330, 180 度剝離) (Kg/in)
20 minutes RT 2.5
72 hrs RT 2.6
保持力: (ASTM D3654, 0.5平方英吋, 1000 克負重, 不鏽鋼板 )
22°C 10,000+ minutes

耐溫:
長期耐溫 (天，週)       80°C

短期耐溫 (分鐘，小時)   120°C

^{3M Double Coated Tissue Tape 7010 棉紙基材雙面膠帶   棉紙基材}

特性

1. 3M 7010 為軟硬適中之感壓膠系統，具備高黏著強度與高保持力，剪切特性，並可

適用於多種表面，包含各式塑膠表面。

2. 3M 7010於泡棉貼合應用中，可提升泡棉之尺寸固定性，降低泡棉之延伸特性。

3. 高強度離型紙有利於膠帶沖切之加工流程。

描述:

棉紙基材雙面膠帶7010 係以棉紙為基材，對於膠帶裁切加工之尺寸穩定性佳，並於貼

合及沖切加工具有優異之作性，其壓克力膠系適合各種表面之貼合

Long Term (days, weeks)    80°C

Short Term (minutes, hours)  120°C

物性與貼合表現

Note: 以下之技術資料係屬量試前初始之測試數據 –非供特殊情形使用

對鋼板黏性: (ASTM D3330, 180 度剝離) (Kg/in)

20 minutes RT                     1.9

72 hrs RT                         2.3

保持力: (ASTM D3654，0.5 平方英吋，1000 克負重，不鏽鋼板 )

22°C                     10,000+ minutes

高溫耐受性  耐溫範圍:

長期耐溫 (天，週)       80°C

短期耐溫 (分鐘，小時)   120°C

^{3M  8003 聚醋基材雙面膠帶 670 海報專用雙面膠 Double Coated Acrylic Adhesive PET Tapes   基材 PET}

Faceside adhesive is on the interior of the roll, exposed when unwound.
Backside adhesive is on the exterior of the roll, exposed when liner is removed.

Adhesion to steel: (ASTM D3330, 180 degree peel) (Kg/in)
20 mins RT     1.1
14 days RT     1.7

Relative High Temperature Operating Ranges: Continuously (day-week): 250°F (121°C) /Short Term (minutes-hours): 300°F (149°C)
Relative Solvent Resistance: Good
U. V. Resistance: Good

8003P 就是 670 海報專用雙面膠  適用於電子產品之系統組立、平面顯示器產業之需求設計，如銘板、光學薄膜之黏貼、泡棉、絕緣膜之貼著固定。

特色: 好撕不易殘膠  可用於固定海報、相片、卡片等輕型物體

^{3M  8004PT 聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET  可重工}

3M 聚醋基材雙面膠帶8004PT 8004 聚醋基材雙面膠帶 特別針對平面顯示器產業名需求設計, 光學薄膜之黏貼, 泡棉, 絕緣膜之貼著固定

雙面丙烯酸膠黏劑, PET系列雙面膠帶, 壓克力膠半透明, 厚度只有 0.039mm  離型紙淺藍半透明淺灰色3M 字樣印別,  感壓膠系統, 高黏著強度與高保持力，剪切力特性，可貼合於各種表面，包含多種塑膠表面, 重工操作中可避免殘膠之現象發生, 長期耐溫 121度C, 短期耐溫 149度C,  耐溶劑性：Good 抗UV 特性：Good

faceside adhesive  : 0.013mm   /   backside adhesive  : 0.013mm  /  PET backing :0.013mm

Faceside adhesive is on the interior of the roll, exposed when unwound.
Backside adhesive is on the exterior of the roll, exposed when liner is removed.

與8018PT 相似  膠厚度不同

係特別針對平面顯示器產業之需求設計，諸如光學薄膜之黏貼，泡棉，絕緣膜之貼著固定，及系統組立之貼合應用均可適用。 具以下特點：* 超薄厚度 / 聚酯薄膜基材 /  對於膠帶裁切加工之尺寸穩定性佳，並於貼合及沖切加工具有優異之操作性。 * 雙面膠帶具有撕除不殘膠特性, 可重工操作,可避免殘膠之困擾
* 高性能壓克力膠系/ 結合高黏著力與優異之耐溫特性，適合各種表面之貼合，包括多種塑膠件。適用於電子產品之系統組立、平面顯示器產業之需求設計，如銘板、光學薄膜之黏貼、泡棉、絕緣膜之貼著固定。
 

8004 double-coated PET tape features a medium-firm acrylic pressure sensitive adhesive system. The key characteristics of this adhesive include a combination of high performance in adhesion and good shear holding power to a wide variety of materials, including many plastics. 8004 is specially designed for display market applications, such as optically management films attachment, foam, isolative film fixing, and system assembly.厚度只有 0.04mm

For 3M 8006 (with 離型膜) or 8006P(with離型紙) 不可重工   厚度與 8018PT相同 長期耐溫 93度C, 短期耐溫 121度C

^{3M  8005 PET基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

3M 8005 雙面膠帶

厚度 0.05 mm

Faceside adhesive: 0.018mm

Backside  adhesive: 0.018mm

PET基材: 0.013mm

離型: 紙材質

適用廣泛材料貼合，黏著力與剪切力佳，容易沖型加工

• 耐溶劑性佳， 抗UV 佳
• 高黏著強度與高保持力，剪切力特性
• 通用型高黏性雙面膠帶
• 易裁切加工
• 長期耐溫 88度C 短期耐溫116度C
• 耐溶劑性：Good
• 抗UV 特性：Good
• 顏色 透明

8005 double-coated film tape features PET carrier, ideal for die cut application and dimension stability, its medium-firm acrylic pressure sensitive adhesive system provide a combination of high performance in adhesion and good shear holding power to a wide variety of materials, including many plastics. 8005 are specially designed for electronic market applications, such as optically management films attachment, foam, isolative film fixing, and system assembly.

Relative Solvent Resistance: Good
U. V. Resistance: Good
Operating Ranges:
Continuously (day-week): 190°F (88°C)
Short Term (minutes-hours): 240°F (116°C)

^{3M  8006 PET基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

3M 8006 雙面膠帶

厚度 0.063 mm

Faceside adhesive: 0.025mm

Backside  adhesive: 0.025mm

PET基材: 0.013mm

離型: 紙材質

適用廣泛材料貼合，黏著力與剪切力佳，容易沖型加工

• 耐溶劑性佳， 抗UV 佳
• 高黏著強度與高保持力，剪切力特性
• 通用型高黏性雙面膠帶
• 易裁切加工
• 長期耐溫 93度C 短期耐溫121度C
• 耐溶劑性：Good
• 抗UV 特性：Good
• 顏色 透明

Relative Solvent Resistance: Good
U. V. Resistance: Good
Operating Ranges:
Continuously (day-week): 200°F (93°C)
Short Term (minutes-hours): 250°F (121°C)

For 3M 8006 (with 離型膜) or 8006P(with離型紙) 不可重工 厚度與 8018PT相同 長期耐溫 93度C, 短期耐溫 121度C

^{3M 8008PT  聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

3M 8008PT 聚醋基材雙面膠帶

厚度 0.08mm

長期耐溫 93度C     短期耐溫121度C     耐溶劑性：Good    抗UV 特性：Good

faceside adhesive  : 0.034mm   /   backside adhesive  : 0.034mm /PET backing :0.013mm

8008PT 產品，係特別針對平面顯示器產業之需求設計，諸如光學薄膜之黏貼，泡棉，絕緣膜之貼著固定，及系統組立之貼合應用均可適用。 具以下特點：
* 超薄厚度 / 聚酯薄膜基材 /  對於膠帶裁切加工之尺寸穩定性佳，並於貼合及沖切加工具有優異之操作性。
* 高性能壓克力膠系/ 結合高黏著力與優異之耐溫特性，適合各種表面之貼合，包括多種塑膠件。
 平面顯示器產業之需求設計，如銘板、光學薄膜之黏貼、泡棉、絕緣膜之貼著固定。

^{3M  8010P 聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

Faceside adhesive is on the interior of the roll, exposed when unwound.
Backside adhesive is on the exterior of the roll, exposed when liner is removed.

8010 double-coated PET tape features a medium-firm acrylic pressure sensitive adhesive system. The key characteristics of this adhesive include a combination of high performance in adhesion and good shear holding power to a wide variety of materials, including many plastics. 8010 is specially designed for display market applications, such as optically management films attachment, foam, isolative film fixing, and system assembly.

Adhesion to steel: (ASTM D3330, 180 degree peel) (Kg/in)
Backside
20 mins RT 2.5
72 hrs RT 3.1

Relative High Temperature Operating Ranges: Continuously (day-week): 200°F (93°C) /Short Term (minutes-hours): 250°F (121°C)
Relative Solvent Resistance: Good
U. V. Resistance: Good

^{3M  8012P 聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

Adhesion to steel: (ASTM D3330, 180 degree peel) (Kg/in)
20 mins RT     2.6
72 hrs  RT     3.2

Relative High Temperature Operating Ranges: Continuously (day-week): 200°F (93°C) /Short Term (minutes-hours): 250°F (121°C)
Relative Solvent Resistance: Good
U. V. Resistance: Good

^{3M  8015P 聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

Adhesion to steel: (ASTM D3330, 180 degree peel) (Kg/in)
20 mins RT     2.9
72 hrs  RT     3.5

Relative High Temperature Operating Ranges: Continuously (day-week): 200°F (93°C) /Short Term (minutes-hours): 250°F (121°C)
Relative Solvent Resistance: Good
U. V. Resistance: Good

^{3M 8018PT  聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET  可重工}

3M 8018PT 聚醋基材雙面膠帶  特別針對平面顯示器產業名需求設計, 光學薄膜之黏貼, 泡棉, 絕緣膜之貼著固定 適用於光學膜片等貼合

雙面丙烯酸膠黏劑, PET系列雙面膠帶, 壓克力膠半透明, 厚度只有 0.063mm  離型紙淺藍半透明 深色3M 字樣印別,  感壓膠系統, 高黏著強度與高保持力，剪切力特性，可貼合於各種表面，包含多種塑膠表面, 重工操作中可避免殘膠之現象發生, 長期耐溫 121度C, 短期耐溫 149度C,  耐溶劑性：Good 抗UV 特性：Good

faceside adhesive 較黏: 0.025mm   /   backside adhesive 較不黏: 0.013mm  / PET backing :0.025mm

與8004PT 相似  膠厚度不同

係特別針對平面顯示器產業之需求設計，諸如光學薄膜之黏貼，泡棉，絕緣膜之貼著固定，及系統組立之貼合應用均可適用。 具以下特點：
* 超薄厚度 / 聚酯薄膜基材 /  對於膠帶裁切加工之尺寸穩定性佳，並於貼合及沖切加工具有優異之操作性。
* 高性能壓克力膠系/ 結合高黏著力與優異之耐溫特性，適合各種表面之貼合，包括多種塑膠件。
* 雙面膠帶具有撕除不殘膠特性, 可重工操作,可避免殘膠之困擾 可重工，低酸性釋出物，PET離形膜，應用於光學膜片、絕緣片之固定，適用觸控面板之框膠

3M 8018P  聚醋基材雙面膠帶   離型紙 淺藍3M logo 白色離型紙

For 3M 8006 離型膜 or 8006P 離型紙 不可重工 厚度與 8018PT相同  長期耐溫 93度C, 短期耐溫 121度C

^{3M  8020P 聚醋基材雙面膠帶 Double Coated Acrylic Adhesive PET Tapes  基材 PET}

Adhesion to steel: (ASTM D3330, 180 degree peel) (Kg/in)
20 mins RT     3.2
72 hrs  RT     3.5

Relative High Temperature Operating Ranges: Continuously (day-week): 200°F (93°C) /Short Term (minutes-hours): 250°F (121°C)
Relative Solvent Resistance: Good
U. V. Resistance: Good

膠帶使用操作程序
貼合表現與有效貼合面積息息相關, 堅實之感壓程序可明顯增加膠帶之貼合表現. 以下系3M建議之標準膠帶使用操作程序:
(a) 欲達最佳黏著，黏著表面必需清潔與乾燥. 一般建議以布沾取1：1 比例之IPA (Isopropyl Alcohol, 異丙醇) 與水的混合溶液進行表面擦拭清潔後, 待表面完全乾燥. (注意：使用IPA前, 請先參照此溶劑之建議注意事項)。 (b) 在清潔溶劑乾燥後, 將膠帶貼合於黏著表面, 以滾筒或其他方式 (刮板) 平均施以約 15psi (1.05公斤/cm2) 之壓力, 使其有效貼合. (c) 將膠帶離型紙撕除, 然後將欲貼著之材質貼上, 同樣施以15psi 之壓力, 使其有效貼合, 若欲去除氣泡, 建議加大壓力, 以物品所承受之限度為上限. (d) 建議理想的施工溫度介於15℃至38℃之間, 勿低於10℃.(e) 欲使膠帶保存至使用時仍具有穩定的品質, 建議之儲存環境為21℃和50%相對濕度. (f) 黏貼膠帶時，宜以一端先貼合後，再緩壓至另一端，以減低氣泡產生之機率。

^{3M 1600T-10 1600TG-10 聚乙烯泡棉基材雙面膠帶  Double Coated Acrylic Adhesive PE Tapes   基材 密閉式分子結構聚乙烯泡棉}

1600T Double Coated Polyethylene PE Foam Tapes

1600TG-10 Gray  灰色   1600T-10 White 白色

1600T 聚乙烯泡棉基材雙面膠帶, 以服貼性佳之密閉式泡棉, 及高性能之壓克力膠構成.  其壓克力膠可提供優異初期黏性及終期黏性. 優異之剪力特性, 長時間之保持力, 於高溫或嚴苛之條件下, 有良好之表現.

膠帶厚度(不含離型紙): 0.044” (1.12 mm) ±10%

概略密度(泡棉): 8 lb/ft3 (128 Kg/m3) 密閉式分子結構聚乙烯泡棉

膠系:壓克力膠

離型紙: 0.07mm White Glassine Paper 格拉辛紙  淺藍色3M PE FOAM 印刷

基材/ 顏色厚度: , 0.0027” (0.07 mm)  灰色  白色

長期耐溫 (天, 週) 70°C (158°F)

 短期耐溫(分鐘, 小時) 82°C (180°F)

1. 所塗佈之壓克力膠係同時具備高初期黏性及高剪力特性, 於各式表面表現均優, 包含多種塑膠.
2. 具備結構性強之聚乙烯泡棉, 可應付高負重, 與強力剝離之外在衝擊.
3. 格拉辛離型紙具備優異之加工性.

^{3M 1660T 聚乙烯泡棉基材雙面膠帶  Double Coated Acrylic Adhesive PE Tapes}

1660T Double Coated Polyethylene PE Foam Tapes

1660T White 白色

1660T 聚乙烯泡棉基材雙面膠帶, 以服貼性佳之密閉式泡棉, 及高性能之壓克力膠構成.  其壓克力膠可提供優異初期黏性及終期黏性. 優異之剪力特性, 長時間之保持力, 於高溫或嚴苛之條件下, 有良好之表現.

膠帶厚度(不含離型紙):0.62mm

膠系:壓克力膠

長期耐溫 (天, 週) 70°C (158°F)

 短期耐溫(分鐘, 小時) 82°C (180°F)

^{3M 4026  4032 PU 雙面膠帶  Double Coated Urethane Foam Tape}

3M Polyurethane Foam  PU 雙面膠帶     厚度不同  耐104度  抗uv 抗化學

3M 4026  Double Coated Urethane Foam Tape, (1.6 mm) thick, are conformable foams that offer high shear strength and are available with either a high temperature holding acrylic adhesive system or a rubber adhesive system for bonding to various types of surfaces for mounting, joining and holding.

• The natural colored urethane foam tape products vary in color from white to light yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet radiation). This color change is normal and does not affect tape performance.
• 3M Double Coated Urethane Foam Tape 4026 is available in roll form and diecut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either individual pieces double linered with an extended liner on one side or in pads of 48 squares.

• Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

UV Resistance: No apparent degradation when exposed to 7 days in U.V. chamber.

Adhesive Type: 100

Mount air fresheners and soap dispensers

於高溫或嚴苛之條件下, 有良好之表現.

膠帶厚度(不含離型紙):1.6 mm

膠系:100膠系

長期耐溫 (天, 週) 104°C (202°F)

 短期耐溫(分鐘, 小時) 193°C (380°F)

Size: 1.6mmx610mm*33M

3M 4032 氨基鉀酸酯基材 雙面膠帶 Double Coated Urethane Foam Tape  0.8mm thickness

3M  雙面膠帶  4004 4008 4016 4026 4032 4052 4056

^{3M 6408 棉紙基材雙面膠 Double-Coated Non-Woven Tape   9448之較薄版本}

1. 6408, 9448 feature a soft acrylic pressure sensitive adhesive system. The key
characteristics of this adhesive include a combination of high initial adhesion and
good shear and holding power to a wide variety of materials, including many
plastics.
2. 6408, 9448 feature controlled adhesive flow into open cell foam and controlled
caliper for bond to application surface.
3. For foam laminating, it provides excellent foam stability to reduce stretching and
allows to more precise alignment during application.

Tape Thickness   0.0051”   (0.130mm)

Carrier  Rayon non-woven cloth

Liner    PE3 polycoated paper   3M logo print in light grey Color

Liner Caliper   0.0043”(0.110mm)

3M 6408 棉紙基材雙面膠帶  白/黑色  抗UV, 可耐候性 長期耐溫80度.短期耐溫至120度  耐溫度佳.初期黏度佳.抗剪力高.軟硬適中  尺寸 L:50M
以棉紙為基材,易裁切加工尺  軟質壓克力感壓膠,有高的初期黏性,好的剪切力及保持力, 有助於對矽膠發泡, 橡膠發泡, 泡棉的應用, 可貼合於各種表面  初期黏性佳，可用於各種塑膠材質或泡綿之貼合

^{3M 9448 9448HK 棉紙基材雙面膠 Double-Coated Non-Woven Tape  棉紙基材}

3M 9448 is double coated pressure sensitive adhesive tape with a non woven carrier. High adhesion acrylic pressure sensitive adhesive has good bond strength on many types of substrate including low surface energy plastics. Has good initial tack at various temperatures. Soft acrylic adhesive can adhere to rough surfaces and shows good bonding. Paper liner is chosen to provide high suitability to converting processes such as die cutting.

Acrylic adhesive/Non-woven cellulose/Acrylic adhesive

Tape thickness: 0.15mm   Release liner, white paper with 3M logo Liner thickness: 0.12mm

3M 9448 棉紙基材雙面膠帶  白/黑色  抗UV, 可耐候性 長期耐溫80度.短期耐溫至120度  耐溫度佳.初期黏度佳.抗剪力高.軟硬適中  尺寸 0.15mmx1200mmx50M
以棉紙為基材,易裁切加工尺  軟質壓克力感壓膠,有高的初期黏性,好的剪切力及保持力, 有助於對矽膠發泡, 橡膠發泡, 泡棉的應用, 可貼合於各種表面  初期黏性佳，可用於各種塑膠材質或泡綿之貼合

終期黏性 (剝離力)HSE  大於90 OZ/inch

^{3M 6408 棉紙基材雙面膠     9448之較薄版本  日本製}

3M 6408為總厚度0.13 mm 棉紙基材雙面膠帶。棉紙基材使裁切加工容易，對低表面能塑膠有良好的初期黏性及黏著力。

• 提升泡棉之尺寸固定性，降低泡棉的延伸，使貼合位置更加精準

• 適合各種塑膠表面

• 提供發泡材料良好的接著

• 易裁切加工

^{3M 9810T 棉紙基材雙面膠 Double Coated Tissue Tapes 9810T Tape  棉紙基材}

3M Product 9810T double-coated tissue tape features a tissue carrier for dimensional stability and improved handling with ease of die cutting and laminating. Double-coated acrylic adhesive is suitable for various surface, and possess good performance

1. 3M 9810T feature a medium-soft acrylic pressure sensitive adhesive system. The key characteristics of this adhesive include a combination of high initial adhesion and good shear and holding power to a wide variety of materials, including many plastics.

2. 3M 9810T features controlled adhesive flow into open cell foam and controlled caliper for bond to application surface.

3. For foam laminating, it provides excellent foam stability to reduce stretching and allows to more precise alignment during application.

4. High-density and high-strength paper liner is excellent for converting process.

Adhesion to stainless steel

15 minute RT  1.9 kg/in.

72 minute RT  2.3 kg/in.

Relative High temperature Operating Ranges

Long Term (days, weeks)80°C

Short Term (minutes, hours)120°C

棉紙基材雙面膠帶  9888T 0.1mm厚版  適用於泡綿、緩衝材、網料等一般用途之貼合應用
 

^{3M 9888T 棉紙基材雙面膠 Double-Coated Non-Woven Tape  棉紙基材}

3M 9888T 9888T General Purpose Double-Sided Tissue Tape High initial tack and very good adhesion to most surfaces.

棉紙基材雙面膠帶  9448 進化版   抗UV, 可耐候性         尺寸 0.15mmx1200mmx50M
以棉紙為基材,易裁切加工尺  軟質壓克力感壓膠,有高的初期黏性,好的剪切力及保持力, 有助於對矽膠發泡, 橡膠發泡, 泡棉的應用, 可貼合於各種表面    終期黏性 (剝離力)HSE  大於120 OZ/inch   長期耐溫 80度C, 短期耐溫 120度C,

‧ 高性能壓克力膠系 ‧ 膠性軟硬適中之感壓膠系統,其結合高黏著強度與高保持力,剪切力特性,且可貼合於各種表面,包含各式塑膠表面。

‧ 棉紙基材‧ 對於膠帶裁切加工之尺寸穩定性佳‧ 服貼性佳‧ 於開放式泡棉之貼合應用中,能有效掌控膠滲流入泡棉之膠量‧ 於泡棉貼合應用中,有助於提昇泡棉之尺寸固定性，以降低泡棉之延伸特性,使貼合位置更加精確‧ 高強度,高磅數之離型紙,有利於膠帶沖切之加工流程‧ 經UL 認證 (File No MH 28421)‧ 經第三公正檢測單位之危害重金屬檢測。

適用： 行動電話之視窗鏡片(Lens)貼合‧ 銘板，標籤，飾板貼合‧ 泡棉，絕緣墊片，絕緣薄膜之貼合應用‧ 顯示器，筆記型電腦，家電之系統組裝貼合應用‧ 車用配件之貼合‧ 一般用途之貼合。黏性佳且耐受剪應力，泡綿、制震緩衝材、銘板、網料、絕緣材、金屬箔等貼合應用

^{3M 9731 一面矽膠 一面壓克力膠 雙面膠帶}

Product Description
3M Double Coated Tapes 9731 and 9731RW have a firm, silicone pressure sensitive adhesive coated on one side of a polyester film carrier and a high performance acrylic adhesive coated on the other side of the carrier. The silicone adhesive features strong holding power to various silicone surfaces, good temperature performance and good solvent resistance. This tape also features high adhesion of the acrylic adhesive to a variety of surfaces along with good high temperature performance and good solvent resistance.

Product Features
• Silicone adhesive provides good bond to silicone rubber, strong holding power to various silicone surfaces, good temperature performance and good solvent resistance.
• 3M  Adhesive 350 provides very high adhesion to a wide variety of materials, excellent shear holding power, high temperature resistance and excellent UV resistance.
• A thin polyester carrier provides dimensional stability and improved handling with ease of die cutting and lamination compared to adhesive transfer tapes.
 

Typical Performance Characteristics

 Property: 350 Acrylic Adhesive Peel Adhesion Method: ASTM D3330

 Property: Silicone Adhesive Peel Adhesion Method: ASTM D3330

 Property: Relative High Temperature Operating Ranges

Application Ideas

•  Applications where bonding silicone rubber to low surface energy materials is necessary.

產品介紹

3M 雙面膠帶 9731系列採用高效能的5.5 mil厚基材，內層為矽膠，外層是壓克力膠。

3M 9731-100為0.1mm厚雙面膠帶，一面為矽膠( 透明PET膜)，另一面是壓克力膠(PE塗佈牛皮紙離型紙)。

使用雙面離型, 雙面離型一面為4 mil PET和一面為5 mil PE塗佈牛皮紙，具耐高溫，中度抗溶劑、適用高至低表面能貼合。

塗佈3M 矽膠和3M 高效能壓克力膠系350號，具良好的高耐溫性 、抗溶劑、初期黏性佳、隨時間增加黏性上升、良好的剪切強度。

* 350 壓克力膠系具優越的抗溶劑特性，可黏合多種材質。包括：低表面能量塑膠、粉末塗料和油性材質

* 矽膠面不需助黏劑即可與矽膠材料有良好的黏著力

* 58號PE塗佈牛皮紙(PCK)離型紙是3m的標準品，良好的吸濕性對模切具有一定的經濟效益

* PET離型膜在高強度模切時可以保護膠面
 

^{3M 無基材雙面膠膜 467MP Adhesive Transfer Tape}

3M Adhesive Transfer Tapes with 3M Adhesive 200MP are the industry choice for metal nameplates for the industrial or electronic applications because of excellent quality, consistency and durability. In addition, as a result of 3M’s innovative, proprietary process, Adhesive 200MP also offers the following performance characteristics:
• Excellent high temperature performance as well as excellent shear strength (that minimizes edge lifting and slippage of parts).
• Excellent resistance to harsh environments; this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water. In addition, it performs well after exposures to humidity and hot/cold cycles.
• Outstanding peel adhesion values are outstanding on metals and HSE plastics. Peel adhesion increases with increased adhesive thickness.

Short term (minutes/hours)   400°F (204°C)
Long term (days/weeks)       300°F (149°C)

• Metal nameplates for the appliance or electronic markets.
• Excellent general purpose bonding in the industrial market.
• Used for nameplates and decorative plates produced on roll to roll rotary die cutting process. 3M Adhesive Transfer Tapes 9567 and 9568 are stabilized adhesive for narrow rolls.

Liner Tan 58# Polycoated Kraft

Adhesive Thickness  2.3 mils (0.06 mm)

3M 467MP 透明無基材丙烯酸薄膜雙面膠帶  無基材膠膜  (厚度 0.06 mm) 3M泛用膠系，黏性、耐剪力優，銘板、絕緣片，Poron貼合

^{3M 無基材雙面膠膜 468MP Adhesive Transfer Tape}

468MP 轉移膠膜: 透明丙烯酸膠膜，優異的耐候性能，耐高溫至204C及 優異的防水性能，5.2mil 0.13mm厚度。
特性: 無基材。 銘板、金屬板、塑料板等的一般粘接 記憶體專用導熱背膠    3M泛用膠系，黏性、耐剪力優，銘板、絕緣片，Poron 貼合

Adhesive Thickness  5.2 mils (0.13 mm)

Short term (minutes/hours)   400°F (204°C)
Long term (days/weeks)       300°F (149°C)

其他薄型雙面膠: 9495MP. 9495LE. 444. 9490. 9690. 9690B. 469. 9456. 9573.9828. 9485PC .9500PC. 415.

^{3M 9079 雙面膠膜  9079 ATT無基材雙面膠帶 9079  500 mm x 100 m}

3M Ultra High Temperature 100HTL Adhesive Transfer Tape 9079 is a solid adhesive transfer tape with no carrier in the adhesive, which provides better adhesive wet-out for improved initial adhesion.

• High temperature release liner that is able to survive from a typical lead-free

solder reflow process having a peak temperature up to 500°F (260°C).

• Ideal for Flexible Printed Circuit (FPC) attachments in many areas of electronics

subjected to high temperature processing and operating environments.

• Releasable after lead-free solder reflow.

• High adhesion, excellent holding power and low outgas.

• 耐無鉛焊錫條件的離型膜，溫度可達260℃ (500℉)
• 適用於軟性印刷電路板(FPC)以及需耐高溫的電子材料黏合用
• 初期黏性佳
• 高黏著力、低釋氣性

3M 9079 無基材雙面膠帶厚度為0.05mm膠帶，可過錫爐，適用FPC製程。

^{3M 9485 雙面膠膜  9485PC Adhesive Transfer Tape}

3M 9485 PC with 3M Adhesive 350 are a modified acrylic adhesive ideal for very high-bond strength to many surfaces. Excellent chemical resistance and bold strength even at elevated temperatures. With a fiber reinforced adhesive which is important for roll stability in narrow widths.

Designed for temperature exposure to 450°F (232°C) for short periods of time and up to 300°F (149°C) over long time frames. A good choice for applications which require adhesion to Low Surface Energy plastics, powder coatings and oily metals.

backing 基材:ATT

Adhesive thinkness 厚度(mm) :5.0mil  (.127 mm)

Liner: 62# Polycoated Kraft - 4.2 mils (0.1mm) thickness

Peel Adhesion Stainless Steel 150 OZ/IN

-Humidity Resistance: High humidity has a minimal effect on adhesive performance. Bond strengths are generally higher after exposure for 7 days at 90°F (32°C) and 90% relative humidity.

-U.V. Resistance: When properly applied, nameplates and decorative trim parts are not adversely affected by outdoor exposure.

Water Resistance: Immersion in water has no appreciable effect on the bond strength. After 100 hours in room temperature water the bond actually shows an increase in strength.

Temperature Cycling Resistance: Bond strength generally increases after cycling four times through: 4 hours at 158°F (70°C)   4 hours at -20°F (-29°C)   16 hours at room temperature

Chemical Resistance: When properly applied, nameplate and decorate trim parts will hold securely after exposure to numerous chemicals including gasoline, oil, Freon TF, sodium chloride solution, mild acids and alkalis.

Heat Resistance: The Adhesive 350 is usable for short periods (minutes, hours) at temperatures up to 350°F (177°C) and for intermittent longer periods (days, weeks) up to 250°F (121°C).

Low Temperature Service: -40°F (-40°C). Parts should be tested for low temperature shock service.

Shelf Life: two year

高粘性/ 耐高溫/對低能量表面的塑件及泡棉有極優的粘性/也適合用於窄寬度貼合/ 抗溶劑/FPC/汽車 引擎標籤 防護條  高黏性、耐高溫，對低能量表面的塑件及泡綿有及優的黏性

^{3M 9495LE 透明雙面膠膜 High Strength Double Coated Tape
with Adhesive 300LSE}

Double Coated Tapes with 3M Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts.

膠帶厚度: 0.17mm

Faceside 膠厚度:0.071mm

Backside 膠厚度:0.086mm

黏性 Adhesion to stainless steel: Faceside  100 (113)   Oz/in (N/100 mm)

黏性 Adhesion to stainless steel: Backside 105 (119)  Oz/in (N/100 mm)

長期耐溫 (天, 週) 93°C

短期耐溫(分鐘, 小時) 149°C

^{3M 9495MP 透明雙面膠膜 Double Coated Tapes}

9495MP 0.0048 in. (0.12 mm) thick Double Coated Film Tape

9495 film tapes feature a thin polyester film for dimensional stability and improved handling with ease of die cutting and laminating. Tapes 9495B and 9690B have a black polyester film to provide opacity or visibility. The #200MP “Hi-Performance” acrylic adhesive on Tapes 9495MP and 9495B provides exceptional temperature and chemical resistance while the #300MP “Hi-Strength” acrylic adhesive on Tapes 9690 and 9690B offers excellent adhesion to many plastics and good shear strength.

Face Side Adhesive: 0.06 mm  Adhesive Carrier:0.013mm   Backside Adhesive: 0.05 mm

• A thin polyester carrier in the products provides dimensional stability and improved handling with ease of die cutting and laminating compared to adhesive transfer tapes. • Moisture stable liner improves processing of parts and ease of liner removal. • #200MP “Hi-Performance” acrylic adhesive on tape 9495MP/9495B provides exceptional temperature and chemical resistance and withstands tough application environments.

Tapes 9495MP/9495B are both ideal for graphic overlays, nameplates, appliques and decorative trim.
• Tapes 9690 and 9690B provide excellent bonding to a variety of foams. • Tapes 9690/9690B are both excellent for thermal and sound damping applications in the electronic and appliance industry. • Tapes 9495B and 9690B offer exceptional bond strength for attaching LED lenses in cellular phones and pagers.

1. 透明 雙面膠膜 (厚度 0.12 mm) thick Double Coated Film Tape
2. 耐溫 長期 121度 ~ 短期 149 度
3. 使用 3M 200MP 膠系 - 耐高溫 抗化學性佳

Length: 55M

^{3M™ 無基材雙面膠帶 9472LE, 54 in x 60 yd
with Adhesive 300LSE}

3M™ 無基材雙面膠帶 9472LE系列使用5 mil厚的3M™ 壓克力 300LSE膠系，具有長效性，提供可靠的黏著力。適用於各式材質的接著需求，例如：金屬、大多數種類的塑膠、玻璃、紙張和漆面。

• 對低表面能量基材可提供良好的黏著力，包括粉末塗料和聚丙烯(PP)等塑膠材質
• 對金屬和高表面能量的塑膠材質具有高黏著力，適用於不同種類基材的黏合
• 高保持力與抗反翹特性
• 良好的抗化性，及抗潮能力

膠帶厚度: 0.127 mm

長期耐溫 (天, 週) 93°C

短期耐溫(分鐘, 小時) 149°C