Product Index

Product >> Tape >> 3M Antistatic Utility Tape 防靜電膠帶>> 3M Anti-Static Masking Tape 40 42 防靜電遮蔽膠帶 40PR

 

3M Antistatic Utility Tape 40PR 防靜電膠帶 40

3M Clear Anti-Static Tape 40:Transparent/1 mil polyester film with anti-static conductive polymer adhesive. Tape 40 generates extremely low levels of triboelectric charge when it is unwound from the roll and also when removed from most surfaces on which it is placed. This makes the tape an excellent choice for use near electronic components and assemblies. 1 in x 72 yd (25,.40 mm x 66 m), 9 per case.

· Holding notes of work orders, Holding obstruction down, Third hand, general purpose  · Close static shielding bags, Conformal coating/masking, Holding and sealing supplies  · Packaging: Box, bag and container  sealing/holding DIP Tubes  · Removing Contaminants

Static charge generation:
Removal from roll, 10% RH: < 20 volts
Removal from roll, 50% RH:  <5 volts
Removal from stainless steel, 10% RH:< 50 volts
Removal from stainless steel, 50% RH: < 5 volts

3M  防靜電膠帶 40: 聚酯薄膜 Polyester Film 1 mil, 加上防靜電且導電的聚酯膠黏劑. 特殊的聚合構造,中和因摩擦而產生的靜電, 膠帶不會因使用中產生靜電, 適合用於包裝或處理電子元件. 厚1mil PET Film.  膠黏劑成分為導電防靜電導電聚酯,有空白及印靜電符號兩款

靜電產生電壓:
解開膠帶相對溼度10%時產生電壓低於 20 volts
解開膠帶相對溼度50充時產生電壓低於  5 volts
不鏽鋼表面撕下相對溼度10%時產生電壓低於 50 volts
不鏽鋼表面撕下相對溼度50充時產生電壓低於 5 volts

 

 

 

3M 42 Anti-Static High-Temperature Masking Tape 防靜電焊合遮蔽膠帶

3M Tape 42:This anti-static high-temperature masking tape is perfect for masking gold leads and other components on boards populated with sensitive integrated circuits. It easily handles the high temperatures of wave soldering and the adhesive is water-based, so no cleaning solvents are needed. It will also handle the temperatures found in test and burn-in ovens. Its unique gold color makes is easy to identify.

3M 42 Anti-Static High-Temperature Masking Tape generates less than 50 volts on unwind and removal from a wide range of substrates. It is especially suited for wave solder, dip and drag solder machines and hand-soldering applications as it helps prevent ESD damage to sensitive electronic components in manufacturing environments. 1-mil polyimide backing, Total thickness 2.2 mils.  Application Temperature Range 40~500°F(5~260°C)

Static charge generation:
Removal from roll, 10% RH: < 20 volts
Removal from roll, 50% RH:  <5 volts
Removal from stainless steel, 10% RH:< 50 volts
Removal from stainless steel, 50% RH: < 5 volts

3M  防靜電焊合遮蔽膠帶 42: 金色防靜電焊合遮蔽膠帶宜用來遮蔽金線及電路板.膠帶42能抵受高溫電焊. polyimide帶基厚1mil,  2.2 mils. Kapton 聚酸亞胺帶基結合: 工作溫度高達40~500°F(5~260°C) 

靜電產生電壓:
解開膠帶相對溼度10%時產生電壓低於 20 volts
解開膠帶相對溼度50充時產生電壓低於  5 volts
不鏽鋼表面撕下相對溼度10%時產生電壓低於 50 volts
不鏽鋼表面撕下相對溼度50充時產生電壓低於 5 volts

 

中央商業有限公司 Power Hub Inc.