^{3M Scotchfil Electrical Insulation Putty 電氣絕緣膠泥}

Scotchfil Electrical insulation putty is a 3.175mm thick electrical grade compound in tape form. It is UL Recognised as a joint insulation for electrical conductors at temperatures up to 80°C (176°F) when over wrapped with either Super 33+ or Super 88 Vinyl Electrical Tape.
 

 • Non-corrosive, synthetic rubber • Excellent electrical properties • Excellent ageing properties • Will not dry out • Applies cleanly without waste Applications • To insulate low-voltage (600 volts and less) connections • To build up cable joints and fill out major irregularities and voids in low-voltage joints(2300 volts and less) in order to obtain a uniform base for further taping • To round out high-voltage connections to gear • To smooth bus bar irregularities • To create a resin dam in resin pressure joints • To create a moisture seal at ground wire exit in high-voltage joints • To moisture seal multi-conductor cable connections

* 1/2 in x 60 in (38 mm x 1,53 m), 125 mil, 12 per case

Putty電氣絕緣膠泥  -  無鉛RoHS
600V及以下絕緣恢復填充母線排不規則部分
使用: 繞包膠帶於需密封防水絕緣處理部位即可

是一種電氣級橡膠基材
具有彈性的膠膏帶。它能纏繞，拉伸或快速，光滑地成形於不規則外形上做絶緣之用
可使用於600V之接頭絶緣
或用於配電箱內之高壓接頭，匯流排等之不規則接點之密封保護
也可使用於屋外形高壓接頭的防水密封
使用絶緣膠膏帶後，一定要用23或130C膠帶做外層包紮以避免滲漏
如與超級33＋，88膠帶合用時，合於UL 80℃之標準

Ingredient: BUTYL RUBBER, AMORPHOUS SILICA, MINERAL OIL, POLYETHYLENE, POLYISOBUTYLENE, TACKIFIER, CARBON BLACK

成分：丁基橡膠、無定形二氧化矽、礦物油、聚乙烯、聚異丁烯、增黏劑、炭黑