^{3M Novec 7200  Fluid HFE-7200 清潔溶劑 氟化液 清潔 導熱 溶劑}

Applications
‧ Cold cleaner (flex circuits, wipe solvent)
‧ Cleaning and rinsing agent for vapor degreasing
‧ Light-duty cleaning (neat)–particulates, fluorolubes, light oils, fluoropolymers

‧ Lubricant carrier Fluorocarbons Hydrocarbons Silicones

‧ Specialty solvents, dispersion medium, reaction medium, extraction solvent

‧ Spray contact cleaner

‧ CFC, HCFC, HFC and PFC replacement agent

‧ Heat Transfer Fluid

Cleaning Fluids  清潔
Its higher boiling point (76°C) and increased solvency make Novec fluid HFE-7200 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Its solvency allows its use in cleaning light-duty soils - like particulates, fluorolubes, light oils and fluoropolymers - and it can be paired with co-solvents to clean heavier-duty soils.
HFE-7200 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP).

Deposition Solvents  溶劑
Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M  Performance Fluid PF-5060DL. Novec fluid HFE-7200 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid HFE-7200 can dissolve lubricants as well as PFPE lubes.
In addition, Novec fluid HFE-7200 offers certain unique process advantages because its higher boiling point reduces evaporative losses and its lower density means that it takes less fluid to fill a lubing machine.

Heat Transfer Fluids  導熱
A wide liquid range (-138°C to 76°C) makes Novec fluid HFE-7200 well-suited to thermal management applications in a wide array of industries. In addition, HFE-7200 fluid has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.
 

vs. HFE-7100

Recommended Operating Temp.

Degree C