Product Index

Product>>Tape>>3M Vinyl Electrical Tape PVC  лента ПВХ

   

3M Vinyl  Electrical Tape 1258 Изолента  No Longer Available 停產

3M 1258 vinyl PVC electrical tape is a 5 mil thick PVC insulation tape. 1258 performs continuously in a temperature ambient of up to 80℃. Excellent resistance to abrasion, moisture, alkalis, acid and corrosion. The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk.


Polyvinyl chloride (PVC) backing     Pressure-sensitive rubber based adhesive    Inhibits corrosion of electrical conductors

  Primary electrical insulation for wire and cable splices rated up to 600 volts and to 80℃  Bonding the wires and cables   Provide mechanical protection for the wires and cables

 

Property (Test Method)             Typical Value
Physical Color                         Red Yellow Green Blue White Black Gray
Thickness                               0.12mm
Tensile strength                       13 lbs/inch
Elongation                              150%
Temperature                            80℃
ATS(oz/inch)                             12
ATB(oz/inch)                              12
Electrical Voltage                     600V
Dielectric strength                   >39.37kV/mm(1000 V/mil)
Insulation resistance                >1012ohm

Size:  0.12mmx17mmx18M / 10 pcs in a pack & 250pcs in a case

1258 通用型 電氣絕緣  無鉛   抗濕氣 磨損 腐蝕 抗鹼和酸性物

紅 黑 白 黃 藍 綠 灰 色, 具標記 的功能

溫 至80 C

3M 環保 無鉛電氣絕緣膠帶1258

RoHS 認証  RoHS 2002/95/EC ,無鉛 低鉛材料 ,耐溫可達80℃,溫度範圍內不脫膠 

изоляция проводов и кабелей при ремонте, сращивание и усиление кабелей

 

PVC tape  

3M Vinyl  Electrical Tape 21S Лента ПВХ

Tape 21S is a quality, general-purpose vinyl insulating tape. It has excellent resistance to abrasion, moisture, alkalis, acid, copper corrosion and varying weather conditions . It is a polyvinyl chloride (PVC) tape that has a high dielectric strength, is very conformable, and provides excellent mechanical protection with minimum bulk.

Tape 21S is not RoHS ready.

* Primary electrical insulation for all wire and cable splices rated up to 600 volts.

* Primary electrical insulation for 600 volts bus applications and protective jacketing for low and high voltage bus.

* Protective jacketing for high voltage cable splices and repairs.

* Harnessing of wires and cables / For indoor or outdoor applications / For above or below grade applications.

* 0.13mmx19mmx18M / 10 pcs in a pack & 500 pcs in a case

изоляция проводов и кабелей при ремонте, сращивание и усиление кабелей  Сделано в Тайване

 

PVC Tape  

3M Scotch Super 33+ Vinyl Electrical Tape RoHS  Изолента

Scotch Super 33+ Vinyl Electrical Tape is a premium grade, 7 mil thick, allweather vinyl-insulating tape. It is designed to perform continuously in ambient temperatures up to 105C (220F). The tape is conformable for cold weather application down to 18C (0F). It has excellent resistance to abrasion, moisture, alkalis, acids, corrosion and varying weather conditions (including ultraviolet exposure). Flame retardant.

Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105C (220F).

Primary electrical insulation for 600 volt bus applications and protective jacketing for low and high voltage bus.

Protective jacketing for high voltage cable splices and repairs.

Harnessing of wires and cables.

With various size of tapes  0.178mmx19mm x 20m Black

 

PVC Tape

 

3M Scotch Vinyl Electrical Tape 35 for Color Coding PVC Tape RoHS

Scotch Vinyl Electrical Color Coding Tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant. Excellent all-weather performance in cold to 32F (0C) or hot to 220F (105C). 7mil thick(0.178mm).

‧ Color: Blue, Brown, Gray, Green, Orange, Red, Violet, White, Yellow.

‧ Size: 1/2 in. x 20 ft. / 13mmx6.1m or  3/4 in. x 66 ft. / 19mmx20.1m

‧ 10 pcs per box & 100 pcs per case (for multi-color pack 5 pcs per box & 60 pcs per case)

Commonly used in these types of applications: 

UL510: As primary insulation on applications up to 600V at max temperature of 80C (176F) and min temperature of -10C (14F) on joints and splices in wires and cables in accordance with NFPA 70, National Electrical Code 

CSA C22.2 No.197: As primary insulation on applications up to 1000V at max temperature of 105C (221F) and a min temperature of -10C (14F) on joints and splices in wires and cables in accordance with Canadian Electrical Code, Part 1 

IEC 60454-3-1: Classification Type 6, Designation IEC 60454-3-1-6/F-PVCP/90 for thermal index of 90C (194F) and min temperature rating of -10C (14F)

Industrial, Commercial and Residential environments 

Where Flame Retardant and Sunlight5 ,Cold Resistance rating is required UL510 

Marking of safety areas and equipment and identifying cable on cell sites, phase coding, motor leads, and piping systems

Cable jacket repair (up to 600V (UL) / 1000V (CSA) as Primary Insulation) and as mechanical protection when overwrapping rubber splicing, and mastic tapes used on LV/MV/HV joints and splices 

Critical indoor and outdoor operations as determined by end-user where use of a general use vinyl electrical tape is not recommended 

Available in 10 fade-resistant colors, see table below 

Country of Origin: USA

 

PVC Tape

 

3M Scotch Super 88 Vinyl Electrical Tape  RoHS 

ScotchR Vinyl Electrical Tape Super 88 is a premium grade, 8.5-mil thick, all-weather vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 105C (220F). The tape is conformable for cold weather application down to -18C (0F).

‧ Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105C (220F).

‧ Primary electrical insulation for 600-volt bus applications, and protective jacketing for high- and low-voltage bus.

‧ Protective jacketing for high-voltage cable splices and repairs.

‧ Harnessing of wires and cables.

 ‧Size  0.216mm thick -- 19mm x 20m   25mm x 33m   38mm x 33m

Commonly used in these types of applications: 

UL510: As primary insulation on applications up to 600V at max temperature of 80C (176F) and min temperature of -10C (14F) on joints and splices in wires and cables in accordance with NFPA 70, National Electrical Code 

CSA C22.2 No.197: As primary insulation on applications up to 1000V at max temperature of 105C (221F) and a min temperature of -18C (0F) on joints and splices in wires and cables in accordance with Canadian Electrical Code, Part 1 

IEC 60454-3-1: Classification Type 7, Designation IEC 60454-3-1-7/F-PVCP/90 for thermal index of 90C (194F) and min temperature rating of -18C (0F)

Industrial, commercial and residential environments 

Where Flame Retardant and Sunlight, Cold Resistance rating is required UL510 

Cable jacket repair (up to 600V (UL) / 1000V (CSA) as primary insulation) and as mechanical protection when overwrapping rubber splicing, and mastic tapes used on LV/MV/HV joints and splices 

Critical indoor and outdoor operations as determined by end-user where use of a general use vinyl electrical tape is not recommended 

Where compatibility with solid dielectric cable insulations, rubber and synthetic splicing compounds is required 

Where reducing moisture ingress is needed, best results achieved when used as an overwrap in combination with a rubber splicing or mastic tape product

For harnessing and bundling of wires and cable where faster build-up is needed

 

 

   

Temflex 500 plus Vinyl Electrical Tape 電工絕緣膠帶 500+ 無鉛 RoHS  No Longer Available 停產

* Primary electrical insulation for all wire and cable splices rated up to 600 volts.

* Harnessing of wires and cables /  For indoor or outdoor applications / For above or below grade applications.

3M Temflex 500 plus Vinyl Electrical Tape 500+ 電工絕緣膠帶是一種性能優良,實用的聚氯乙烯絕緣膠帶,該膠帶常期工作溫度為80℃,低溫至0℃時仍具有較好從形性。

Сделано в Тайване

Thickness厚:  5 mils (0.130mm)
Elongation
: 140%
Breaking Strength
: 4 kgs/in
Dielectric Strength
: 5 kv
Adhesion to Steel
: 0.5 kg/in    17.6oz./in

 黏性增強  符合環保訴求   從形性

應用:  電壓等級600V及以下的電線、電纜接頭的主絕緣  /  高壓電纜接頭的防護套  / 電線或電纜的綁扎    Сделано в Тайване

 

PVC Tape  

3M Highland Vinyl Electrical Tape 700 RoHS

Highland Vinyl Electrical Tape is a flame-retardant, conformable, general purpose, 7-mil (0.18mm) thick vinyl insulation tape. It has excellent resistance to abrasion, moisture, alkalis, acid, copper corrosion and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has a high dielectric strength and provides excellent mechanical protection with minimum bulk.UL Listed and CSA Certified for 194F (90C).

* Primary electrical insulation for all wire and cable splices rated up to 600 volts.

* Harnessing of wires and cables /  For indoor or outdoor applications / For above or below grade applications.

* 3/4 in x 66 ft (19 mm x 20,1 m), 100 pcs per case      Not in Stock..無庫存

 

PVC Tape  

Temflex 1700 Vinyl Electrical Tape RoHS    Not in Stock..無庫存

3M Temflex General Use Vinyl Electrical Tape 1700 is used for protective jacketing and harnessing. Abrasive. UL Listed and CSA Certified for 176F (80C).

* Primary electrical insulation for all wire and cable splices rated up to 600 volts.

* Harnessing of wires and cables /  For indoor or outdoor applications / For above or below grade applications.

* 3/4" x 36 yd. (19 mm x 32,9 m) / 3/4" x 60' (19 mm x 18,3 m) /  3/4" x 66' (19 mm x 20,1 m), 100 pcs per case       Now in Stock

 

3M  Vinyl Tape

  UL Listed in UL File E129200, Product Category OANZ

Specification

Number

Type

UL 510

For use as electrical insulation up to 600 volts and 80C

 

22, 33, Super 33+, 35,

Super 88, 1710

 

PVC Insulating Tape

Flame Retardancy

 

 

The following tapes meet

22, 33, Super 33+, 35,

Super 88, 1710

PVC Insulating Tape

the flame retardancy

 

 

requirements of UL 510

 

 

  CSA Certified in CSA File LR48769, Product Class 9052-02

Specification

Number

Type

CSA 22.2 No. 197

 

 

For use as electrical insulation

22, 1710

PVC Insulating Tape

up to 1000 volts at temperatures

 

 

not to exceed 80C

 

 

For use as electrical insulation up to 1000 volts at temperatures not to exceed 105C

Super 33+, 35,

Super 88

PVC Insulating Tape

 

 

3M Tape Wrapping Tips

3M 膠帶纏繞技巧

Type of Tape

Number of Layers/Application Instructions

Vinyl Electrical - Jacketing and Mechanical Protection

PVC電氣膠帶 外表保護和機構性保護

Always use a minimum of two half-lapped layers. The last layer should be wrapped in a more relaxed manner -- let the last wrap relax to prevent the layer from flagging.膠帶一半寬度層層搭接 至少使用兩層。最後一層應以更寬鬆的方式纏繞 - 讓最後一段結束纏繞時,以放鬆無張力方式貼上,以防止該段鬆脫。

Rubber Tapes - Electrical Insulation, Mechanical Padding, Water Sealing and Shaping

橡膠膠帶 - 電氣絕緣、機械填充、防水和填充成型

Wrap tape tightly to achieve the water tight seal. Rubber tapes are typically overwrapped with vinyl tape.

緊緊纏繞膠帶以實現防水密封。橡膠膠帶通常用PVC膠帶包裹。

High Voltage Tapes - Insulating and Semi-conductive Layers

高壓膠帶 用於絕緣層和半導體層

Apply outside of roll to the cable, in highly stretched half-lapped layers. Never use a semi-conductive tape as an insulation.

將膠帶拉開伸展 以膠帶外側面貼在電纜上 一半寬度層層搭接。勿使用半導體膠帶作為絕緣膠帶。

Mastic Compounds - Insulating, Mechanical Padding, Moisture Sealing and Shaping

膠泥化合物膠帶 - 絕緣、機械填充、防潮密封和成型

Mastic compounds are to be overwrapped with vinyl tapes to initiate flow and watertight seal. Do not apply excessive amount of mastic to prevent oozing.

膠泥化合物膠帶纏繞好時 應該用PVC膠帶再包裹 使其具有撥水流動性和防水密封性。不要用過量的膠泥以防止滲漏。

 

 

 

 

中央商業有限公司 Power Hub Inc.