Product >> Tape >> 3M Electrical Tape Material vs. Applications 3M 絕緣膠帶用途 材質 功能 使用要領
材質 與 功能
|
材質 功能 |
Vinyl |
Rubber Tapes |
Mastic & Filler Putty Tapes |
Varnish Cambric |
Arc Proofing Tapes |
Silicone Tapes |
Glass Cloth Tapes |
Mining and Jacket Repair Tapes |
|
Protective jacketing |
V |
V |
V |
|||||
|
Electrical insulation |
V |
V |
V |
V |
V |
V |
V |
|
|
Moisture sealing |
V |
V |
V |
V |
||||
|
ID and color-coding |
V |
|||||||
|
Harness and bundling |
V |
|||||||
|
Mechanical padding |
V |
V |
V |
V |
||||
|
Shaping |
V |
V |
V |
|||||
|
Arc proofing |
V |
|||||||
|
Connection re-entry |
V |
V |
Wrapping Tips 膠帶使用要領
| Type of Tape | Application | Number of Layers/Instructions |
| Vinyl Electrical Tapes PVC電氣膠帶 |
Jacketing and Mechanical Protection
外表保護和機構性保護 |
Always use a minimum of two half-lapped layers. The last
layer should be wrapped in a more relaxed manner — let the last wrap relax
to prevent the layer from flagging. 膠帶一半寬度層層搭接 至少使用兩層。最後一層應以更寬鬆的方式纏繞 - 讓最後一段結束纏繞時，以放鬆無張力方式貼上，以防止該段鬆脫。 |
| Rubber Tapes 橡膠膠帶 |
Electrical Insulation, Mechanical Padding, Water Sealing and
Shaping 電氣絕緣、機械填充、防水和填充成型 |
Wrap tape tightly to achieve the watertight seal. Rubber
tapes are typically overwrapped with vinyl tape. 緊緊纏繞膠帶以實現防水密封。橡膠膠帶通常用PVC膠帶包裹。 |
| High Voltage Tapes 高壓膠帶 |
Insulating and Semi-conductive Layers 用於絕緣層和半導體層 |
Apply outside of roll to the cable, in highly stretched
half-lapped layers. Never use a semi-conductive tape as an insulation. 將膠帶拉開伸展 以膠帶外側面貼在電纜上 一半寬度層層搭接。勿使用半導體膠帶作為絕緣膠帶。 |
| Mastic Compounds 膠泥化合物膠帶 |
Insulating, Mechanical Padding, Moisture Sealing and Shaping 絕緣、機械填充、防潮密封和成型 |
Mastic compounds are to be overwrapped with vinyl tapes to initiate flow and watertight seal. Do not apply excessive amount of mastic to prevent oozing. 膠泥化合物膠帶纏繞好時 應該用PVC膠帶再包裹 使其具有撥水流動性和防水密封性。不要用過量的膠泥以防止滲漏。 |
中央商業有限公司 Power Hub Inc.